Panasonic CQ-VX2200W Car Stereo System User Manual


 
35
CQ-VX2200W
1
E
N
G
L
I
S
H
26
Precautions
Be sure to remove the bracket for transportation
before use (installation).
CUse screws (5 mm φ x 8 mm) with washers for
installation.
Be careful not to lose any of these parts.
Transportation Bracket x 2
CQ-VX2200W
Screw with washer
(5 mm
φ ×
8 mm) x 4
¡We strongly recommend that you wear gloves for installation work to protect yourself from injuries.
¡When bending the mounting tab of the mounting collar with a screwdriver, be careful not to injure your
hands and fingers.
Note: Use a pench to bend the
fingers on the bracket vertically.
Bracket (L)
Bracket (R)
CQ-VX2200W
Appended Screws (q or w).
Select appropriate ones matching
the hole shape of the bracket.
w Flat-Head
Screw x 8
(5 mmφ x 8 mm)
Note: Binding-Head screws (5 mmφ
x 8) q are appended four pieces, the
other four pieces are fixed on the
transportation bracket. [Screw with
washer (5 mmφ x 8 mm)]
q Binding-Head
Sdrew x 8
(5 mmφ x 8 mm)
Typical Installation (For vehicle with double-DIN size)
1. Remove Car radio or little object box from the vehicle and the stopping brackets.
2. Use the appended screws q or w to install the brackets on this unit.
3. Install this unit into the vehicle.
¡If a special kit (option) is necessary for a certain year’s, model or grade of
vehicle, please consult your dealer.
¡For electrical connecting simply to your vehicle, you can buy a prepared
power connector from your dealer.
Transportation bracket removal
Note:
¡The screw holes on the right side are not tapped. Please only use screws provided to mount the unit.
¡To tighten the screws, press its head down straight forward.
Installation for except for the above motors
For general use kit (option) or motor’s special kit (option), Please consult your dealer.