Panasonic CY-BT200UCY-BT200U Car Video System User Manual


 
24
Installation
Main Unit
Q'ty: 1
Switch Unit
(2 m)
Q'ty: 1
Microphone with Bracket
(5 m)
Q'ty: 1
System-up connecting cable
(3 m)
Q'ty: 1
Double-sided Tape
(12 x 55 mm)
Q'ty: 2
Double-sided Tape
(15 x 30 mm)
Q'ty: 1
Cable Clamp
Q'ty: 5
CY-BT200U
CY-BT200U
q
w
e
r
t
y
u
Warning
¡This installation information is designed for professional
installers with knowledge of automobile electrical safety sys-
tems and is not intended for non-technical, do-it-yourself indi-
viduals. It does not contain instructions on the electrical installa-
tion and avoidance of potential harm to air bag, anti-theft and
ABS braking or other systems necessary to install this product.
Any attempt to install this product in a motor vehicle by anyone
other than a professional installer could cause damage to the
electrical safety systems and could result in serious personal
injury or death.
¡If your car is equipped with air bag and/or anti-theft systems,
specific procedures may be required for connection and discon-
nection of the battery to install this product. Before attempting
installation of this electronic component against the manufac-
turer’s recommendation, you must contact your car dealer or
manufacturer to determine the required procedure and strictly
follow their instructions.
FAILURE TO FOLLOW THE PROCEDURE MAY RESULT IN THE
UNINTENDED DEPLOYMENT OF AIR BAGS OR ACTIVATION OF
THE ANTI-THEFT SYSTEM RESULTING IN DAMAGE TO THE VEHI-
CLE AND PERSONAL INJURY OR DEATH.
Installation Hardware