Filter
Top Products
English
25
1
Remove the cable from the battery negative
terminal.
2
Connect all the cables of CY-BT200U (this
unit).
3
Secure the Main unit q, Switch Unit w and
Microphone with Bracket e.
q Attach the Main unit q and the Switch Unit w with the
double-sided tape
t y.
w Secure the microphone with bracket e.
e Secure all connection cables with Cable Clamp u.
4
Reconnect the Battery Cable.
Main Unit q
Peel off the back papers
Fix the cable with the
Cable Clamp
u.
Sun visor
Attach the Microphone with
Bracket
e by clipping on the
sun visor etc.
Peel off the back papers
Switch Unit w
Caution
¡Make sure that wiring is completed before installation.
¡Do not install the product where it is exposed to strong
vibrations or is unstable. Avoid slanted or strongly curved
surfaces for installation. If the installation is not stable,
the unit may fall down while driving and this can lead to
an accident or injury.