Filter
Top Products
90
CY-VHD9500U
CY-VHD9500U
91
VCR, Camcorder, etc.
Problem Possible cause Possible solution
The picture from a
VCR or a camcorder is
not displayed.
A VCR or Camcorder is not
connected correctly.
Connect a VCR or Camcorder correctly.
Display settings
Problem Possible cause Possible solution
The picture is dark.
The picture is whitish.
Something is wrong
with the picture.
The picture is light in
color.
The screen is not adjusted
properly.
Make every adjustment of the screen.
Red, blue, or green
spots appears.
This is a characteristic of liquid
crystal panels.
This is not a problem (page 10).
Troubleshooting
(continued)
E
N
G
L
I
S
H
47
E
N
G
L
I
S
H
48
Remote Control Unit
Problem Possible cause Possible solution
No response to
pressing buttons
The battery is inserted in the
wrong direction. A wrong battery is
inserted.
Insert a correct battery in the correct
direction.
The lithium battery is weak. Replace the battery with new one.
The aiming direction of the remote
control unit is wrong.
Aim the remote control unit at the
sensor of the unit and press buttons.
The sensor is exposed to direct
sunlight. (The remote control
unit may not be operable when
the sensor is exposed to direct
sunlight. In such a case, the
system is not faulty.)
Block off sunlight to the sensor.
Error Display Messages
DVD video/Video CD/CD/MP3
Disc is dirty, scratched or upside
down.
Check the disc.
Display Possible cause Possible solution
The unit will not operate for some
reason.
Eject the disc. If the disc does not
eject when you press [<], then press
the reset switch (page 92). If normal
operation is not restored, call the store
where you purchased the unit or the
nearest Panasonic Servicenter.
Playback Error
Please eject.
A CD that has data other than
CD-DA or MP3 type is loaded.
Check the disc.
An attempt was made to play a PAL
disc.
Eject the disc.
This type of disc
cannot be played.
Please eject.
Disc is dirty, scratched or upside
down.
Check the disc.
A CD that has data other than
CD-DA or MP3 type is loaded.
Check the disc.
An attempt was made to play a PAL
disc.
Eject the disc.
Mechanical Error
Please eject.
An attempt was made to play a disc
with a region number that was not
“1” or “ALL”.
Eject the disc.
This disc may not
be played in your
region.
Please eject.
The unit for some reason cannot
read the fi le you are trying to play.
(File recorded in an unsupported
fi le system, compression scheme,
data format, fi le name extension,
damaged data, etc.)
Select a fi le that the unit can read.
Confi rm the type of data recorded
on the disc. Create a new disc if
necessary.