Panasonic SC-MAX770 Car Stereo System User Manual


 
VQT5K75
14
Clock and timers
This is a 24-hour clock.
1 Press [CLOCK/TIMER] to select “CLOCK”.
2 Within 20 seconds, press [3, 4] to set the time.
3 Press [OK].
Press [CLOCK/TIMER] to show the clock for a few
seconds.
Note:
Reset the clock regularly to maintain accuracy.
The clock is reset when there is a power failure or when the
AC power supply cord is removed.
Except for Bluetooth
®
source
You can set the timer to come on at a certain time to:
Wake you up (play timer)
Record from the radio or the external equipment
(record timer)
Play timer and record timer cannot be used together.
Preparation
Set the clock.
1 Press [CLOCK/TIMER] to select “ PLAY” or
“REC.
2
Within 10 seconds, press [
3
,
4
] to set the start time.
3 Press [OK].
4 Do steps 2 and 3 again to set the end time.
5 Press [3, 4] to select the source you want to
play or record and then press [OK].
6 For record timer
Press [3, 4] to select “MEMORY” or “USB B” to
keep the recording and then press [OK].
To start the timer
1 Prepare the audio source.
2 Press [PLAY/REC ] to select “ PLAY ON” or
“REC ON.
PLAY ON” or “ REC ON” is shown.
To cancel, press [PLAY/REC ] to select “TIMER OFF”.
The system must be switched off for the timer to operate.
To check the settings
Press [CLOCK/TIMER] to select “ PLAY” or “ REC”.
Note:
The play timer starts at a low volume and increases
gradually to the preset level.
The record timer starts 30 seconds before the set time with
the volume muted.
The timer comes on at the set time every day if the timer is on.
The sleep timer switches off the system after the set time.
Press [SLEEP-AUTO OFF] to select the setting (in
minutes).
To cancel, select “OFF”.
Note:
The play and sleep timer or the record and sleep timer can
be used together.
The sleep timer always comes first. Be sure not to set an
overlap of timers.
Sound and illumination
You can adjust the sound effect.
1 Press [SOUND] to select the sound effect.
2 Press [2, 1] to select the desired setting.
Preset EQ
Press [PRESET EQ]
(main unit:
[ [LATIN] PRESET EQ]
)
to select desired preset.
Setting the clock
Play and record timer
•Play timer
Prepare the music source you want to listen to
(disc, USB, internal memory, radio or external
equipment) and set the volume.
•Record timer
Connect the USB device to (for USB
recording) and tune to the radio station or select
the external equipment.
Sleep timer
30 MIN
>
60 MIN
>
90 MIN
>
120 MIN
>
OFF
^=================n
Adjust the sound effect
BASS/MID/TREBLE
-4 to +4
SURROUND
“ON SURROUND” or “OFF SURROUND”
•INPUT LEVEL
(For AUX IN 2)
“NORMAL” or “HIGH”
Note:
Select “NORMAL” if the sound is distorted during
“HIGH” input level.
SUPER WOOFER
“SW1”, “SW2”, “SW3” or “OFF”
D.BASS
“D.BASS ON”, “D.BASS BEAT” or “D.BASS OFF”
Note:
D.BASS BEAT:This function emphasizes the
attack level of the drum beat and produces a
punchy sound.
Depending on the type of a track, the effect may
be small.
SC-MAX770PU_eng.book 14 ページ 2014年3月6日 木曜日 午後2時54分