Filter
Top Products
7
VQT5K75
1 Standby/on switch [Í], [Í/I]
Press to switch the unit from on to standby mode or
vice versa. In standby mode, the unit is still
consuming a small amount of power.
2 Alphanumeric buttons
To select a 2-digit number
Example: 16: [S10]
>[1]>[6]
To set a character
Example: B: [2]
>[2]
3 Delete a programmed track
Delete a selected track in a playlist
4 Select audio source
5 Basic playback control
6 Select the sound effects
7 Start the title search for internal memory
8 View content information
Press and hold the button: Decrease the
brightness of the display panel and turn off the DJ
function buttons and illumination, etc.
9 Recording operation control
: Set the play timer or record timer
; Set the clock and timer
< Set the sleep timer
Press and hold the button: Automatically switch off
function switches off the system if you do not use the
system for 20 minutes. (Except radio)
= Set the program function
> Adjust the volume of the system
? Mute the sound of the system
To cancel, press the button again.
“MUTE” is also canceled when you adjust the volume
or when you switch off the system.
@ Set the play menu item
A Internal memory playlist operation
B Select and enter buttons
C Set the edit mode for and internal memory
D Internal memory playlist direct buttons
Press and hold to add a track to the corresponding
playlist.
Press to select the playlist.
DJ function direct buttons
Press [DJ JUKEBOX], [DJ SAMPLER] or
[DJ EFFECT] to switch on the DJ function.
Press [1] to [6] on main unit to select the desired function.
To cancel, press the selected [1] to [6] again.
E Switch on the DJ function
To cancel, press the button again.
F Turntable for DJ and multi control
G Browse playlist of the internal memory
Browse tracks or albums
Turn [MULTI CONTROL] to browse the track.
Press [1/;] to start playback from the selection.
Press [ALBUM/TRACK] to select album or track and
then turn [MULTI CONTROL] to browse.
Press [1/;] to start playback from the selection.
H Open or close the disc tray
I Remote control sensor
Distance: Within approximately 7 m
Angle: Approximately 20° up and down, 30° left and right
J Display panel
K PLAY
USB port ( )
USB status indicator
L REC/PLAY
USB port ( )
USB status indicator
M Select the illumination effect
N AUX IN 2 terminal
O Microphone jack
P Adjust the volume of the microphone
Q NFC touch area
R Disc tray
Disc
1
Press [ OPEN/CLOSE] on the main unit to open
the disc tray.
Put in a disc with the label facing up.
Press [ OPEN/CLOSE] again to close the disc
tray.
2 Press [CD] and then press [1/;] to start
playback.
You can view the available information on the display
panel.
Press [DISPLAY-DIMMER] during playback.
Note:
• Maximum characters that can be shown:
approximately 32
• This system supports ver. 1.0, ver. 1.1 and ver. 2 ID3 tags.
• Text data that the system does not support can show
differently.
Playing disc
• Stop playback
Press [∫].
• Pause playback
Press [1/;].
Press again to continue playback.
•Skip album
Press [3, 4].
• Skip track
Press [:] or [9]
(main unit: [:/6] or [5/9]).
• Search through track
Press and hold [6] or [5]
(main unit: [:/6] or [5/9]).
Viewing available information
SC-MAX770PU_eng.book 7 ページ ２０１４年３月６日 木曜日 午後２時５４分