Filter
Top Products
CR-SRF100/CR-SRT100
14
6.5. Setup FM Modulator Frequency
The Sirius receiver has the capability to send audio output to an FM radio by means of a hardware FM
modulator. This option is enabled through the setup mode, and the FM frequency is set up as well.
Below is a table of the 11 FM Modulator settings available: the “OFF” state and the 10 frequency settings.
The CDU displays the frequency (MHz) or OFF when in this mode.
When the [SEL] knob is rotated, the system increments or decrements the modulator frequency according
to the table. It is recommended that an unused frequency currently with no FM broadcast be used for the
FM Modulator frequency. Pressing the [SEL] button selects the modulator frequency currently displayed
and moves the user to the next setup item.
Please disregard if an FM modulator is not in your system.
SEL
PWR
17233_SGould 08/15/02 14:46 Page 14