Filter
Top Products
CR-SRF100/CR-SRT100
29
EXITING FROM CATEGORY MODE
You exit category mode by entering a different mode. There are several ways to do this …
• press the [CHANNEL] button to enter CHANNEL mode.
• press the [PRESET] button to enter PRESET mode.
• enter SETUP mode.
The system indicates exiting category mode by turning off the category mode indicator located next to the
category button.
SELECTING A CATEGORY
You select a category by pressing the [CATEGORY] button until the desired category is displayed. If the
category mode screen is not currently being displayed, the first press of the [CATEGORY] button results in
the current category being displayed. Further presses of the [CATEGORY] button selects the next category.
The category mode screen will be displayed for a fixed time after the last button press of [CATEGORY].
After that, the system returns to the standard display format … leaving the last category selected as the
current category.
The channel is not changed when pressing the [CATEGORY] button. The channel changes once you rotate
the [SEL] knob/button (which changes the channel). At this time, if the category display screen is being
displayed, the CDU immediately returns to the previous display format.
CHANNEL SELECTION WITHIN CATEGORY MODE
As the [SEL] knob is rotated, the system increments or decrements to the next available audio channel
within the current category.
If you have just entered a new category and you rotate the [SEL] knob …
• clockwise: the system will start with the first channel (lowest channel number) in that category.
• counter clockwise: the system will start with the last channel (highest channel number) in that category.
The CDU will wrap around after the low or high channel number is reached.
SEL
PWR
17233_SGould 08/15/02 14:46 Page 29