Peavey SP 118 Car Speaker User Manual


  Open as PDF
of 4
 
Frequency Response, 1 Meter
On-Axis, Swept-Sine in Anechoic
Environment:
49Hzto300Hz(±3dB)
Usable Low Frequency Limit
(-10 dB point):
34Hz
Power Handling:
600Wattscontinuous
1,200Wattsprogram
2,400Wattspeak
Sound Pressure Level, 1 Watt, 1 Meter
in Anechoic Environment:
98.0dB(2.83Vinput)
Maximum Sound Pressure Level
(1 meter):
126.0dBSPLcontinuous
132.0dBSPLpeak
Radiation Angle Measured at -6 dB
Point of Polar Response:
Essentiallyomnidirectional
Transducer Complement:
One18"woofer,vented
1808-8ALCPProRider®
Box Tuning Frequency:
38Hz
Minimum Recommended Active
Crossover Frequency and Slope for
Bi-amping:
90Hzat18dB/octave
High-passfilter35to40Hz
at12to24dB/octaveis
recommended
Impedance (Z):
Nominal:8.0Ω
Minimum:6.5Ω
Input Connections:
Onefour-pintwistlockconnector
Two1/4"jacks
Allinputsinparallel
Enclosure Materials & Finish:
Aspenhardwoodplywood
withinternalbracingfinished
inHammertex™covering
Dimensions (H x W x D):
Width:20.80"/528mm
Depth:29.88"/759mm
Height:32.29"/820mm
Net Weight:
107lbs.(48.5kg)
FEATURES
Thisloudspeakersystemdelivers
highoutput,lowdistortionbass
fromasingle18"ProRiderwoofer
mountedinaventedenclosure.
Thisunitisdesignedfor
portability.Theenclosureis
constructedofAspenhardwood
plywoodaugmentedwith
dual-layeredtopandbottom
panelscoveredwithheavyduty
texturedblackHammertex™and
reinforcedwithhighimpactplastic
corners.Afull-lengthwrap-around
perforatedsteelgrilleprotects
thefrontoftheenclosure.Apole
mountisalsoincludedforsupport
ofahigh-passenclosure.
SPECIFICATIONS SP
™
118
next