Pioneer AVH-P6400CD Car Stereo System User Manual


 
Built-in CD Player
En
24
06
Section
Playing a CD
(Only AVH-P6400CD)
These are the basic steps necessary to play a
CD with your built-in CD player. More advanced
CD operation is explained starting on page 25.
1 TRACK NUMBER indicator
Shows the track currently playing.
2
PLAY TIME indicator
Shows the elapsed playing time of the cur-
rent track.
3 DISC TITLE
When playing a CD TEXT disc, the DISC
TITLE is displayed. With regular CDs that do
not usually have the titles recorded on them,
NO TITLE is displayed (refer to page 28).
1 Insert a CD into the CD loading slot.
Playback will automatically start.
After inserting a CD, press SOURCE to select
the built-in CD player.
CD loading slot
EJECT button
You can eject a CD by pressing EJECT on the
head unit.
To avoid a malfunction, make sure that no
metal object comes into contact with the opera-
tion panel when it is detached.
2Use VOLUME to adjust the sound level.
Rotate to increase or decrease the volume.
3 To perform fast forward or reverse, press
and hold 2 or 3.
4 To skip back or forward to another track,
press 2 or 3.
Pressing 3 skips to the start of the next track.
Pressing 2 once skips to the start of the current
track. Pressing again will skip to the previous
track.
Notes
The built-in CD player plays one, standard,
12-cm or 8-cm (single) CD at a time. Do not
use an adapter when playing 8-cm CDs.
Do not insert anything other than a CD into
the CD loading slot.
If you cannot insert a disc completely or if
after you insert a disc the disc does not play,
check that the label side of the disc is up.
Press EJECT on the head unit to eject the
disc, and check the disc for damage before
inserting the disc again.
If the built-in CD player does not operate prop-
erly, an error message such as ERROR-11 may
be displayed. Refer to Understanding built-in
CD player error messages on page 68.
Do not detach with a CD partially inserted in
the CD slot as it may scratch or damage the
disc.
TEXT
3
1 2