Pioneer AVH-P6400CD Car Stereo System User Manual


 
Audio Adjustments
En
53
Introduction of audio
adjustments
The display for this MENU is the same regard-
less of which source you operate from.
1 AUDIO display
Shows the audio adjustments status.
1 Press A.MENU in each source display.
MENU is displayed.
2 Press 5 or to select AUDIO, and press
A.MENU.
The AUDIO MENU is displayed as follows:
FAD/BAL (fader/balance adjustment)EQ
MENU (equalizer curve adjustment)BASS
(bass)TREBLE (treble)LOUDNESS (loud-
ness)SUB WOOFER (subwoofer)NON FAD-
ING (non fading)HPF (high pass filter)SLA
(source level adjustment)
You can operate a desired function. For details,
refer to the pages for each of the functions.
NON FADING is only displayed when S.W
CTRL:EXTERNAL is not set in INT MENU. (SUB
WOOFER is not displayed.)
When the subwoofer controller setting is
S.W
CTRL:INTERNAL or REAR SP: S.W, you can
switch the SUB WOOFER. (Refer to page 57.)
When the subwoofer controller setting is only
S.W CTRL:EXTERNAL, you can switch the non
fading output on/off mode. (Refer to page 57.)
When selecting the FM tuner as the source,
you cannot switch to SLA.
Select BACK in the MENU display or press
BACK to return to the previous display.
Pressing WIDE on the head unit returns you to
the previous display.
To return to the playback display, press
BAND/ESC or WIDE on the remote control.
When the setting is REAR SP: S.W, FAD/BAL
indications are for BAL.
Note
If you do not operate the audio function within
about 30 seconds, the display is automatically
returned to the source display.
English
Español
Deutsch
Français
Italiano
Nederlands
11
Section
1