Filter
Top Products
En
59
English
Español
Deutsch
Français
Italiano
Nederlands
12
Section
Initial Settings
Adjusting initial settings
Initial settings lets you perform initial set up of
different settings for this unit.
1 FUNCTION display
Shows the function status.
You cannot select AUDIO MENU from the OFF
SOURCE MENU.
1 Press SOURCE and hold until the unit turns
off.
2 Press A.MENU and the OFF SOURCE
MENU is displayed.
3 Press 5 or ∞ to select INIT, and press
A.MENU.
FM STEP (FM tuning step)
DAB PRIORITY (Priority function)
RDS AUTO PI (Auto PI seek)
DETACH WARNING (Warning tone)
AUX (Auxiliary)
ILLUMINATION (Illumination color)
REAR SP (Rear output and subwoofer)
TEL MUTE/ATT (Telephone muting)
You can operate a desired function. For details,
refer to the pages for each of the functions.
Use the following instructions to operate each
particular setting.
• To cancel initial settings, press BAND/ESC or
WIDE on the remote control.
Switching the warning tone
If the operation panel is not detached from the
head unit within five seconds of turning off the
ignition, a warning tone will sound. You can turn
off this warning tone.
1 Press 5 or ∞ to select DETACH WARNING
from the INIT MENU, and press A.MENU.
DETACH WARNING adjustment indications are
displayed.
2 Select WARNING: ON or OFF with 5/∞.
Pressing 5/∞ will switch WARNING between
ON and OFF and that status will be displayed
(e.g., WARNING :ON).
Switching the auxiliary setting
It is possible to use auxiliary equipment with
this unit. Activate the auxiliary setting when
using auxiliary equipment connected to this
unit.
1 Press 5 or ∞ to select AUX from the INIT
MENU, and press A.MENU.
AUX adjustment indications are displayed.
2 Select AUX ON or OFF with 5/∞.
Pressing 5/∞ will switch AUX between ON and
OFF and that status will be displayed (e.g.,
AUX :ON).
1