Filter
Top Products
2 Touch to turn rear view camera set-
ting on.
# To turn rear view camera setting off, touch .
3 Touch or to select an appropriate
setting for polarity.
Each time you touch
or it switches be-
tween the following polarity:
! BATTERY When the polarity of the con-
nected lead is positive while thegear shift
is in REVERSE (R) position
! GND When the polarity of the connected
lead is negative while the gearshift is in RE-
VERSE (R) position
Setting the automatic open
function
To prevent the display from hitting the shift
lever of an automatic vehicle when it is in P
(park) position, or when you do not wish the
display to open/close automatically, you can
set the automatic open function in the manual
mode.
Furthermore, to adjust the LCD panel slide po-
sition, you can turn the set back on or off.
1 Touch A.MENU and SETUP and then
touch FLAP SETTING.
2 Touch
and the LCD panel slides to
the back.
# Touch and the LCD panel slides to the
front.
3 Touch or to select the display to
open/close automatically or manually.
Touch
to select MANUAL, and you have to
press OPEN/CLOSE to open/close the display.
Touch
to select AUTO, and the display
automatically opens/closes when power to
this unit is turned on.
Setting the clock
Use these instructions to set the clock.
1 Touch A.MENU and SETUP and then
touch CLOCK ADJUST.
2 Touch OFF to turn the clock display on.
ON will appear in the display instead of OFF.
Clock display is now on.
# You can also turn the clock display on or off by
pressing FLIP DOWN/CLOCK when the LCD
panel is closed.
# To turn the clock displayoff, touch ON.
3 Touch or to select the segment of
the clock display you wish to set.
Each time you touch
or it will select one
segment of the clock display:
HourMinute
As you select segments of the clock display
the segment selected will be highlighted.
4 Touch or to set the clock.
Each time you touch
it increases the se-
lected hour or minute. Each time you touch
it decreases the selected hour or minute.
Notes
! You can match the clock to a time signal by
touching JUST.
If the minute is 0029, the minutes are
rounded down. (e.g., 10:18 becomes
10:00.)
If the minute is 3059, the minutes are
rounded up. (e.g., 10:36 becomes 11:00.)
! Even when the sources are off, the clock dis-
play appears on the display.
Other Functions
En
87
Section
17
Other Functions