Filter
Top Products
Capture an image in JPEG files
You can capture image data and use it as wall-
paper. Images can be stored and recalled ea-
sily in this unit.
! Only one image can be stored on this unit.
Old image is overwritten with the new one.
1 Pause the slideshow when the desired
image is displayed.
Refer to Introduction of still image playback op-
erations on page 36.
2 Capture the image.
Refer to Introduction of still image playback op-
erations on page 36.
3 When “Do you save this image?” is dis-
played, touch Yes.
While storing the image to this unit, “Saving
the image. Don’t switch off the battery.” is
displayed. When the process is finished,
“Image saved.” is displayed.
# To cancel the storage process, touch No.
Changing the wide screen
mode
You can select a desired mode for enlarging a
4:3 picture to a 16:9 picture.
1 Display the screen mode.
Refer to Introduction of video playback opera-
tions on page 24.
Refer to Introduction of still image playback op-
erations on page 36.
2 Touch the desired wide mode setting.
FULL (full screen)
The 4:3 picture is enlarged in the horizontal direc-
tion only, giving youa 4:3 TV picture (normalpic-
ture) without any omissions.
ZOOM (zoom)
The 4:3 picture is enlarged in the same proportion
both vertically and horizontally; ideal for a cinema
sized picture (wide screen picture).
NORMAL (normal)
The 4:3 picture is displayed as it is, giving you no
sense of disparity since its proportions are the
same as that of the normal picture.
TRIMMING (trimming)
The image is displayed across the entire screen
with the horizontal-to-vertical ratio left as is. If the
horizontal-to-vertical ratio differs between the dis-
play and the image, the image may be displayed
partly cut off either at the top/bottom or sides.
Notes
! You cannot operate this function while driving.
! Different settings can be stored for each video
source.
! When a video is viewed in a wide screen mode
that does not match its original aspect ratio, it
may appear different.
! Remember that using the wide mode feature
of this system for commercial or public view-
ing purposes may constitute an infringement
on the author’s rights protected by the Copy-
right Law.
! The video image will appear coarser when
viewed in ZOOM mode.
! FULL/ZOOM/NORMAL is used for videos.
NORMAL/TRIMMING is used for JPEG im-
ages.
Switching the XM/SIRIUS
channel selection mode
You have two methods for selecting a channel:
by number and by category. When selecting
by number, channels in any category can be
selected. Select by category to narrow your
search down to only channels in a particular
category.
Mode All CH (channel number select setting)
—Mode Category (channel category select
setting)
En
49
Section
14
Detailed instructions
Detailed instructions