Filter
Top Products
Switching the muting/
attenuation level
You can select the muting/attenuation level of
[Mute Set]. This setting is also effective for a
mute signal that has been received from the
MUTE lead connected to the navigation unit.
p This menu is not available in the following
cases:
— Audio source is [OFF]
— During muting/attenuation
— [5.1Ch Setup]is[On]
% Touch [Mute Level] in System Settings
menu.
Each touch of [Mute Level] changes the set-
tings as follows:
! All — The volume becomes 0
! –20dB — The volume becomes 1/10
! –10dB — The volume becomes 1/3
p When you select [All], [Mute] is displayed
and no audio adjustments are possible dur-
ing the sound is turned off.
p When you select [–20dB]or[–10dB], no
audio adjustments, except volume control,
are possible during the sound is attenu-
ated.
p Operation returns to normal when the cor-
respond action is ended.
p Even when a mute signal has been received
from MUTE lead connected to the naviga-
tion unit, navigation voice guidance cannot
be attenuated or muted. If you want to mute
the navigation guidance voice temporarily,
use
on the navigation map screen.
Changing the voice output of
the navigation guidance
You can set the speaker to output the naviga-
tion guidance and phone voice, etc.
% Touch [Guide/Tel SP] in System Settings
menu.
Each touch of [Guide/Tel SP] changes the set-
tings as follows:
! Left SP — Uses only the front left speaker
! Right SP — Uses only the front right speak-
er
! L+R SP — Uses both the front right and left
speakers
Switching the auto antenna
setting
If the blue lead of the navigation system is
connected to the antenna control terminal of
the vehicle, select either of the following set-
tings.
! Radio — The antenna extends or turns on
only when the audio source is FM or AM.
The antenna is stored or turned off when
the source is switched to another.
! Power — The antenna extends or turns on
when the ignition switch is turns on. The
antenna is stored or turned off when the
ignition switch is turned off.
% Touch [Auto ANT] in System Settings
menu.
Touching [Auto ANT] switches between
[Radio] and [Power].
p Regardless of whether [Radio]or[Power]
is selected, turning off the ignition switch
will cause the antenna to automatically re-
tract or turn off.
Setting the clock display on the
video image
You can select whether to display the clock on
the video image screen without touch panel
keys, such as DVD-Video, AV INPUT, or TV
tuner.
% Touch [Clock DISP] in System Settings
menu.
Touching [Clock DISP] switches between
[All SCRN] and [Audio SCRN].
! All SCRN — The clock is overlaid on the
“Video image”
! Audio SCRN — The clock is not overlaid on
the “Video image”
Customizing the Audio Setting related with Audio Visual
En
151
Chapter
17
Customizing the Audio Setting related with Audio Visual