Filter
Top Products
2 Touch [5.1Ch Setup] in the System Set-
tings menu.
If you touch [5.1Ch Setup], it will be turned
[On]. If you touch [5.1Ch Setup] again to turn
[Off] the setting, [5.1Ch Setup] will disappear.
If you want to turn it [On] again, you have to
repeat the procedure from the Step1.
Other Functions
Selecting the video for “Rear
display”
You can choose either to show the same
image as the front screen or to show the se-
lected source on the “Rear display”.
1 Press AV button to switch Audio opera-
tion screen.
2 Touch the source icon and then touch
[REAR SCREEN].
Each touch of [REAR SCREEN] changes the
settings as follows:
! MIRROR — The video on the front screen of
the navigation unit is output to the “Rear
display”
! DVD — The video and sound of the DVDs
are output to the “Rear display”
! AV — The video and sound of AV INPUT
are output to the “Rear display”
p When MIRROR is selected, the following re-
strictions are applied to “Rear display”.
— When the TV tuner is connected with
AV-BUS, its “Video image” cannot be
output. (Connect the TV tuner’s rear out-
put to “Rear display” directly.)
— When selecting [Rear View] in the map
display, nothing is displayed.
— All sounds cannot be output for “Rear
display”.
— There is no picture on “Rear display”
while [Picture Adjust] for
[Back-Camera] is carried out.
— The map screen navigation images out-
put to the “Rear display” differ from
standard NTSC format images. There-
fore, their quality will be inferior to the
images that appear on the front screen.
p When DVD is selected, the following re-
strictions are applied to “Rear display”.
— When a CD or MP3 disc is set in the
built-in DVD drive, nothing is output.
p When AV is selected, the following restric-
tions are applied to “Rear display”.
— The “Video image” and sound are output
only when AV INPUT has both videoand
sound.
— The “Video image” and sound are output
only when the appropriate setting on
[AV Input]is[Video].
Operating the picture adjustment
CAUTION
For safety reasons, these functions are not avail-
able while your vehicle is in motion. To enable
these functions, you must stop in a safe place
and put on the parking brake before setting your
route (Refer to To ensure safe driving on page 22).
You can adjust the picture for each source and
rear view camera.
1 Press V button to display Picture Adjust
screen.
! Brightness — Adjusts the black intensity
! Contrast — Adjusts the contrast
! Color — Adjusts the color saturation
Customizing the Audio Setting related with Audio Visual
En
153
Chapter
17
Customizing the Audio Setting related with Audio Visual