Filter
Top Products
CAUTION
For safety reasons, these functions are not avail-
able while your vehicle is in motion. To enable
these functions, you must stop in a safe place
and put on the parking brake before setting your
route (Refer to To ensure safe driving on page 22).
Entering the Map Menu
1 Press MENU button to display the navi-
gation menu.
2 Touch [Map] to display the Map menu.
3 Change the setting.
= For more details about “Adjusting each
item”, refer to Chapter 5
p This section describes the details of the set-
ting for each item. Settings marked with an
asterisk (*) show that these are default or
factory settings.
Setting the Item on the
Map Screen
1 Touch [Map] in the navigation menu,
then touch [Displayed Info].
The Displayed Info screen appears.
On this screen, you can operate the following
items.
2 To finish the setting, touch [OK].
Close Up View
You can select the method to display the close
up view of the intersection.
! 2D*:
Displays the close up view with the 2D map.
! 3D:
Displays the close up view with [Driver’s
View].
! [Off]:
Does not display the close up view.
City Map
You can select whether to display the city map
when in certain metropolitan city areas.
! [On]*:
Automatically switches to the city map
when in a city map area.
! [Off]:
Does not show the city map.
p Even if you switch [City Map]to[On],
city map cannot display in areas where
there is no city map data.
Tracking Display
You can trace locations that you have already
passed with white dots on the route.
! On (Always):
Displays tracking for all journeys.
! On (This journey):
Displays tracking dots but erases them
when the navigation system is turned off
(when turning off the engine of your vehi-
cle).
! [Off]:
Does not display tracking dots.
Show Mute Button
Selects whether to display or hide the voice
guidance mute key on the map.
Modifying Map Configurations
En
46
Chapter
05