Open as PDF
Built-in CD Player
Introduction of advanced built-in
CD player operation
1 FUNCTION display
Shows the function status.
FUNCTION to display the function
FUNCTION repeatedly to switch between
the following functions:
RPT (repeat play)—RDM (random play)—
T.SCAN (scan play)—PAUSE (pause)
• To return to the playback display, press
• If you do not operate the function within about
30 seconds, the display is automatically
returned to the playback display.
Repeat play lets you hear the same track over
FUNCTION to select RPT.
FUNCTION until Repeat appears in the
2 Press 5 to turn repeat play on.
Repeat :ON appears in the display. The track
presently playing will play and then repeat.
3 Press ∞ to turn repeat play off.
Repeat :OFF appears in the display. The track
presently playing will continue to play and then
play the next track.
• If you perform track search or fast
forward/reverse, repeat play is automatically
Playing tracks in a random order
Random play lets you play back tracks on the
CD in a random order.
1 Press FUNCTION to select RDM.
Press FUNCTION until Random appears in the
2 Press 5 to turn random play on.
Random :ON appears in the display. Tracks will
play in a random order.
3 Press ∞ to turn random play off.
Random :OFF appears in the display. Tracks will
continue to play in order.