Open as PDF
Using ITS playlists
ITS (instant track selection) lets you make a
playlist of favorite tracks from those in the multi-
CD player magazine. After you have added your
favorite tracks to the playlist you can turn on ITS
play and play just those selections.
Creating a playlist with ITS program-
You can use ITS to enter and playback up to 99
tracks per disc, up to 100 discs (with the disc
title). (With multi-CD players sold before the
CDX-P1250 and CDX-P650, up to 24 tracks can
be stored in the playlist.)
1 Play a CD that you want to program.
Press 5 or ∞ to select a CD.
FUNCTION and hold until TITLE
appears in the display, then press
to select ITS
TITLE is displayed, press FUNCTION
repeatedly, the following functions appear in the
TITLE (disc title input)—ITS(ITS programming)
3 Select a desired track by pressing 2or 3.
4 Press 5 to store the currently playing track
in the playlist.
ITS Input is displayed briefly and the currently
playing selection is added to your playlist. The
display then shows ITS again.
5 Press BAND/ESC to return to the playback
• After data for 100 discs has been stored in
memory, data for a new disc will overwrite the
Playback from your ITS playlist
ITS play lets you listen to the tracks that you
have entered into your ITS playlist. When you
turn on ITS play, tracks from your ITS playlist in
the multi-CD player will begin to play.
1 Select the repeat range.
Refer to Repeating play on page 21.
2 Press FUNCTION to select
FUNCTION until ITS Play appears in the
3 Press 5 to turn ITS play on.
ITS Play :ON appears in the display. Playback
begins of those tracks from your playlist within
the previously selected MCD (multi-CD player
repeat) or DISC (disc repeat) ranges.
• If no tracks in the current range are
programmed for ITS play then ITS Empty is
4 Press ∞ to turn ITS play off.
ITS Play :OFF appears in the display. Playback
will continue in normal order from the currently
playing track and CD.