Filter
Top Products
Audio Adjustments
En
29
1 Press EQ to select the equalizer.
Press EQ repeatedly to swith between the follow-
ing equalizer.
SUPER BASS—POWERFUL—NATURAL—
VOCAL—CUSTOM1—CUSTOM2—FLAT
Adjusting equalizer curves
You can adjust the currently selected equalizer
curve setting as desired. Adjusted equalizer
curve settings are memorized in CUSTOM1 or
CUSTOM2.
1 Press AUDIO
to select the equalizer mode .
Press
AUDIO until EQ Low/EQ Mid/EQ High
appears in the display.
2 Select the equalizer band you want to
adjust with 2/3.
EQ Low (low)—EQ Mid (mid)—EQ High (high)
3 Press 5 or ∞to adjust the equalizer curve.
Each press of 5 or ∞ increases or decreases
the equalizer curve respectively.
• +6 – –6 is displayed as the equalizer curve is
increased or decreased.
Note
• If you make adjustments when a curve other
than CUSTOM2 is selected, CUSTOM1 curve
is updated.
Fine adjusting equalizer curve
You can adjust the center frequency and the Q
factor (curve characteristics) of each currently
selected curve band (EQ Low/EQ Mid/EQ High).
1 Press
AUDIO and hold unitil frequency and
the Q factor (e.g., F 80 Q 1W) appears in the
display.
2 Press AUDIO to select the desired band for
adjustment.
LOW (low)—MID (mid)—HIGH (high)
3 Select the desired frequency with 2/3.
Press 2 or 3 until the desired frequency
appears in the display.
LOW : 40—80—100—160 (Hz)
MID : 200—500—1 k—2 k (Hz)
HIGH : 3.15 k—8 k—10 k—12.5 k (Hz)
4 Press 5/∞to select the desired Q factor.
Press 5 or ∞ until the desired Q factor appears
in the display.
2 N—1 N—1 W—2 W
Note
• If you make adjustments when a curve other
than CUSTOM2 is selected, CUSTOM1 curve
is updated.
English
Español
Deutsch
Français
Italiano
Nederlands
06
Section
Level (dB)
Center frequency
Frequency (Hz)
Q=2N
Q=2W