Pioneer DEH-P640 Car Stereo System User Manual


 
Initial Settings
En
35
Notes
• Even if you change this setting, there is no
output unless you switch the non fading out-
put (refer to page 31) or subwoofer output
(refer to page 30) in the audio menu on.
• If you change the subwoofer controller, sub-
woofer output and non fading output in the
audio menu return to the factory settings.
1 Press FUNCTION to select SW.
Press FUNCTION repeatedly until Rear SP
appears in the display.
2 Change the rear output setting with 5/.
Pressing 5/will switch between Rear SP
:FULL (full-range speaker) and Rear SP :S.W
(subwoofer) and that status will be displayed.
Notes
• When no subwoofer is connected to the rear
output, select Rear SP:FULL.
• When a subwoofer is connected to the rear
output, set for subwoofer Rear SP:S.W.
• When the rear output setting is Rear SP:S.W,
you cannot change the subwoofer controller.
3 Change the subwoofer controller with
2/3.
Pressing 2/3 will switch between S.W Control
:INT and S.W Control :EXT and that status will
be displayed.
Switching the Telephone
Muting/Attenuation
Sound from this system is muted or attenuated
automatically when a call is made or received
using a cellular telephone connected to this
product.
1 Press FUNCTION to select TEL.
Press FUNCTION repeatedly until Telephone
appears in the display.
2 Switch the telephone muting/attenuation
with 2/3.
Pressing 2/3 will switch between Telephone
:ATT (attenuation) and Telephone :MUTE (mut-
ing) and that status will be displayed.
English
Español
Deutsch
Français
Italiano
Nederlands
07
Section