Filter
Top Products
31
E
Using the launcher (WHITEBOARD mode)
WHITEBOARD mode settings
Various settings can be congured for WHITEBOARD mode.
Administrator authority (the administrator password) is
required.
1. Touch [Setting] in the launcher.
You will be prompted to enter a password.
2. Enter the password and touch [OK].
Enter the password set in the Admin Password. (If a
password is not set, enter “00000”.)
The settings screen appears.
3. Select an item and congure the settings.
BASIC Setting
Animation Style
Set the animation that appears when the launcher
displayed.
None ............ No animation.
Simple.......... Display an animation that rises up.
UX Effect ..... Displays an animation that comes to your
hand.
Desktop Picture
Show desktop background
Set whether a background image is shown on the desktop.
Select the background image from the pull-down menu.
Auto refresh desktop background
When the
checkmark
is checked, the image on the
desktop changes in a random order.
Cloud System
Congure the Cloud System settings.
None .................. Do not use Cloud System.
Cloud Desk ........ Use Cloud Portal Ofce.
WHTEBOARD E-mail Settings
Register the SMTP and e-mail addresses to be used in
WHITEBOARD “Send Email”. E-mail cannot be sent to an
unregistered address.
NST-Lite Setup
Shows the Network Scanner Tool settings. For details,
see the Network Scanner Tool Operation Manual.
Admin Settings
Startup Settings
Auto start WHITEBOARD when startup
Sets whether or not the WHITEBOARD is started when
the monitor is started.
Start TDL Host automatically
Sets whether or not the host function of Touch Display
Link is started when the monitor is started.
Show TDL Host and Wi-Fi AP information
Sets whether or not the Touch Display Link host
or wireless LAN access point connection status is
displayed.
Touch Panel Setting
Hardware information
Displays the current touch mode of the touch panel.
(For service technicians.)
Calibration
Calibration is used to perform position alignment so
that the mouse cursor moves to the correct position
when the screen is touched.
Start Screen Adjust Tool
Displays the adjustment pattern used for screen
adjustment.
Touch Panel Tool Property
Select the touch mode of the touch panel.
Mouse Mode
... Touch information is output as mouse information.
Multi-Touch Mode
... Touch information is output as digitizer information.
For details of setting item, see the Touch Panel
Settings Tool Operation Manual.
MFP Settings
Printer Used
Sets the default printer driver that the WHITEBOARD
uses for printing.
Scan Folder
Sets the folder in which scan data sent to the monitor
is saved. If the checkmark is removed, the scan link
cannot be used.
USB ash drive Setup
Notify when USB ash drive is found
Sets whether or not an icon and notication message
appears on the screen when a USB ash drive is inserted.
Admin Password
Set the administrator password that is required to access
the settings screen.
Wi-Fi Settings
Sets the wireless LAN access point information (SSID,
password).
Clear Setting
Returns the BASIC Setting / Admin Settings to the factory
default settings.
System Settings
You can congure the settings related to system. (See page
70.)
4. Touch [Apply Settings].
• When “Finish settings and restart” appears, touch the
button and restart the monitor. After restart, the settings will
be applied.