Sharp PNL602B Car Video System User Manual


 
7
E
n
Operation Setting
Function Button 1
Set the function that activates when function button 1 is pressed with the touch pen.
RightClick : Functions as a right click.
Disable : Disables function button 1.
Function Button 2
Set the function that activates when function button 2 is pressed with the touch pen.
Pen Software Link : Functions as a link button for a Pen Software function.
Disable : Disables function button 2.
TIPS
The Pen Software function that links to function button 2 is set in the Pen Software.
Input Mode Setting
Set the input mode for the touch panel. It is normally recommended that you use “Standard”.
Standard : Automatically switches between pen mode and handwriting mode.
HandWrite : Select this when you only wish to use your nger and will not be using the touch pen function.
Pen : Select this for operation by touch pen only. Only the touch pen can be used; your nger cannot be used.
Touch Mode Setting
Select the touch mode (Single touch mode or Dual touch mode).
For information on the touch modes, see the monitor operation manual.
Single : Use Single touch mode.
Dual : Use Dual touch mode. (Windows 7 only)
TIPS
When the input mode is “Pen”, “Dual” cannot be selected.
Detect Eraser Area
Specify whether the area (rectangle) of a touched item is detected. The application must support area detection.
Resolution Change Notice
Enable : When the screen resolution is changed, a message is displayed regarding the calibration setting.
Disable : When the screen resolution is changed, the previously set calibration values are automatically applied. When a
resolution is used for the rst time, the message regarding the calibration setting will appear.
Optimize HTML
For normal operation and writing text by hand, this setting is not necessary.
When manipulating a document with a small click range for HTML links, enable this and adjust the effective “Click range”.
Touch Panel Settings