Open as PDF
Adjusts the volume of treble-level sound.
Adjusts the volume of bass-level sound.
Adjusts the balance of the audio sound between right and left.
Resets the values of the AUDIO menu items to the factory preset values.
Select “ON” and then press
Set the date and time. Press
to select the date and time, and press
to change the numerical values.
Set the date in “Year/Month/Day” order.
Set the time on a 24-hour basis.
SCHEDULE (See page 27.)
You can turn the power on/off at a specied time.
Sets the display language for the menu screen.
HOT PLUG CONTROL
Sets whether to use hot plug control for the DVI-D and HDMI input terminals.
Selects the terminal used to input audio signals in each input mode.
Selects the method with which to control the monitor from the computer.
Congures the settings to control the monitor from the computer via LAN. (See page 39.)
ID No. SET
Assigns ID numbers to monitors connected in a daisy chain (see page 31), using the RS-232 cables.
The numbers 1 to 26 are available for ID numbers.
If “0” is set, the system regards this as the state where no ID number is set.
Displays monitor information (model, serial number, MAC address).