Sharp PN-U423 Car Video System User Manual


 
22
E
n
PICTURE
BRIGHT
Adjusts the backlight brightness.
CONTRAST
Adjusts the difference between the bright and dark portions of the image.
BLACK LEVEL
Adjusts the entire brightness of the video signals.
TINT (HDMI/COMPONENT/VIDEO)
Adjusts the hue. Selecting - changes the color towards green, and selecting + changes it towards magenta.
COLORS (HDMI/COMPONENT/VIDEO)
Adjusts the color intensity.
SHARPNESS
Adjusts the sharpness of the image.
COLOR ADJUSTMENT
COLOR MODE
Changes the color mode on the screen. The color mode on the screen can also be changed using a remote control unit. (See
page 18.)
* sRGB is DVI-D, DisplayPort, D-SUB input only. See page 18 for details.
WHITE BALANCE
THRU ..............Displays the input signal level as is.
PRESET ..........Selects the color temperature using PRESET.
USER .............. Used for adjusting R-/G-/B-GAIN and R-/G-/B-OFFSET respectively.
PRESET
Selects the color temperature when the WHITE BALANCE is set to PRESET.
The setting values are shown for reference. The color temperature of the screen varies over time. This function is not
intended to keep the color temperature constant.
USER
Adjusts each item when the WHITE BALANCE is set to USER.
R-GAIN ............... Adjusts bright-toned red component.
G-GAIN .............. Adjusts bright-toned green component.
B-GAIN ............... Adjusts bright-toned blue component.
R-OFFSET ......... Adjusts dark-toned red component.
G-OFFSET ......... Adjusts dark-toned green component.
B-OFFSET ......... Adjusts dark-toned blue component.
GAMMA
Selects the gamma.
ADVANCED
NOISE REDUCTION (HDMI/COMPONENT/VIDEO)
Reduce the noise of playback images on video.
Setting a higher level reduces more noise. However, it may cause blurring on an image.
HDMI RGB INPUT RANGE (HDMI)
Sets the RGB input signal range. Set according to the image.
When the setting is different, images will be displayed with washed out blacks and compressed gradients.
RESET
Resets the values of the PICTURE menu items to the factory preset values.
Select “ON” and then press
ENTER
.
Menu Items