Sharp PN-U423 Car Video System User Manual


 
36
E
SETUP menu
Function
Command Direction
Parameter Reply Control/Response contents *
DATE/TIME SETTING DATE WR
AABBCCDDEE AABBCCDDEE
AA: Year, BB: Month, CC: Day, DD: Hour, EE: Minute
SCHEDULE SH01-
SH07
WR ABBCCDDEEF
GHIJKLMNO
ABBCCDDEEF
GHIJKLMNO
Schedule of a specied number
A : Schedule 0= Not effective, 1 = Effective
B : Power-on hour 00-23, 99 = Not effective
C : Power-on minute 00-59, 99 = Not effective
D : Power-off hour 00-23, 99 = Not effective
E : Power-off minute 00-59, 99 = Not effective
F : Input 0 = Not specied, 1 = DVI-D, 2 = DisplayPort,
3 = HDMI, 4 = D-SUB, 5 = COMPONENT, 6 = VIDEO
G : EVERY DAY 0 = OFF, 1 = ON
H : EVERY WEEK 0 = OFF, 1 = ON
I-O : MON-SUN 0 = OFF, 1 = ON
LANGUAGE LANG WR 14 14 ENGLISH
1 1 DEUTSCH
2 2 FRANÇAIS
3 3 ITALIANO
4 4 ESPAÑOL
5 5 РУССКИЙ
6 6
INPUT SELECT
HOT PLUG
CONTROL (DVI-D)
HPCT WR 0-1 0-1 0: OFF, 1: ON
HOT PLUG
CONTROL (HDMI)
HPCH WR 0-1 0-1 0: OFF, 1: ON
AUDIO SELECT DVI-D
ASDP WR 1-2 1-2
1: AUDIO1, 2: AUDIO2
D-SUB
ASAP WR 1-2 1-2
1: AUDIO1, 2: AUDIO2
HDMI
ASHA WR 0-2 0-2
0: HDMI, 1: AUDIO1, 2: AUDIO2
COMPONENT
ASCA WR 1-2 1-2
1: AUDIO1, 2: AUDIO2
VIDEO
ASVA WR 1-2 1-2
1: AUDIO1, 2: AUDIO2
DisplayPort
ASDI WR 1-3 1-3
1: AUDIO1, 2: AUDIO2, 3: DisplayPort
ID SETTING ID NO.SETTING IDST W 0-26 Sets the monitor’s ID number. (“0” means “no ID number”.)
R 0-26 Returns the monitor’s ID number.
ID NO. SETTING
(ONCE)
IDSL W 1-26 Sets a monitor ID number.
This ID number is only effective for the command immediately after this
command.
0 Clears the ID number if one has been designated.
ID NO. SETTING
(SUBSEQUENT)
IDLK W 1-26 Sets a monitor ID number.
This ID number is effective for the next and all subsequent commands after this
command.
0 Clears the ID number if one has been designated.
INFORMATION MODEL INF1 R Value
SERIAL NO SRNO R Value
MONITOR menu
Function
Command Direction
Parameter Reply Control/Response contents *
MONITOR STDR WR 0-1 0-1 0: LANDSCAPE, 1: PORTRAIT
OSD H-POSITION OSDH WR 0-100 0-100
OSD V-POSITION OSDV WR 0-100 0-100
STANDBY MODE STBM WR 0-1 0-1 0: STANDARD, 1: LOW POWER
OFF IF NO OPERATION ATOF WR 0-1 0-1 0: OFF, 1: ON
POWER ON DELAY PWOD WR 0-60 0-60 0: OFF, 1-60 seconds
Controlling the Monitor with a PC (RS-232C)