Filter
Top Products
[ Installation ]
12
Refer to Figure 3 and attach the vent mount to a heating/air conditioning vent in your
vehicle. Position the two tension springs A against a vent louver B. Then push the vent
mount into the vent, far enough so that the hooks C drop down and hook the rear of the
vent louver (Figure 4). Once you are sure that the hooks have grasped a vent louver, the
tension springs A will keep the vent mount hooked to the louver.
C
B
A
D
PUSH
HOOKED
2.
Figure 3Figure 3
Figure 4Figure 4