VocoPro PV-802 Car Speaker User Manual


  Open as PDF
of 2
 
The PV-802 speakers can each be mounted on speaker stands using a VocoPro speaker stand adapter (sold separately).
NOTE: These speaker stand adapters are included with the purchase of VocoPro SS-88 speakers
stands. Contact your local VocoPro dealer to order a pair of VocoPro SS-88 speaker stands.
Attaching the Adapter to the Speakers
NOTE: The 4 mounting screws are included with the PV-802.
1. Remove the rubber pads covering the screw openings on the bottom of the PV-802 speakers to reveal the
holes for the mounting screws. (Fig A)
NOTE: DO NOT remove the screw that is already on the bottom of the PV-802 main speaker. This
screw is keeping the internal amp and mixer in place and must not be removed.
2. Align the slots on the flat part of the adapter with the holes on the bottom of the PV-802 speaker (Fig. B)
3. Screw in the screws, tightly fastening the adapter to the speaker.
NOTE: Make sure the adapter is attached firmly to the speaker.
Attaching the Speaker Stand Adapters
DO NOT
REMOVE
Rubber
Pads
Rubber Pads/
Screw Holes
MAIN SPEAKER (BOTTOM) SECOND SPEAKER (BOTTOM)
Fig.A
Fig.B
1