1. Manuals
  2. Car Audio and Video Support
  3. Aiwa Support
  4. Car Stereo System Support
Support User Manuals
Question About Aiwa Car Stereo System cdcx217yu
wireing harness...

need harness wire posission

Asked by john on 09/10/2008 1  Answer

ManualsOnline posted an answer 16 years, 2 months ago

The ManualsOnline team has found the manual for this product! We hope it helps solve your problem. Get the Manual Here

BuzzardBreath posted an answer 16 years, 2 months ago

0 Looking at the unit from the back, there are 16 pins. I will number from top left corner pin as #1 then pin directly under pin #1 will be pin 2 and so forth with #16 pin being the far right bottom pin. Pin #1 = White wire Front left pos speaker. #2 = White/black wire front left neg speaker. #3 = Green wire rear left + speaker. #4 Green black wire rear left neg speaker. #5 = violet rear right pos speaker. #6 violet black wire rear right neg speaker. #7 = gray wire front right pos speaker. #8 gray black wire front right neg speaker. #9 and #10 are blank. #11 = blue wire power antenna. #12 blank. #13 = red wire 12 volt pos switched. #14 blank. #15 = black wire 12 volt ground. #16 = yellow wire 12 volt pos always hot. I assume you should install a fuse in the yellow wire. Hope that helps you.
Was this answer helpful?

Add Your Answer

Please Note: Do not submit personal information as it will be displayed online.
Ask a Question Request a Manual