A SERVICE OF

logo

MSP-CSC1 Installation Instructions
6
Figure 4
Optional Installation of Feet
NOTE: Installation of feet is optional depending on the surface
on which the mount will be used. In certain cases, the
feet may help reduce the possibility of any scratching of
the surface on which the mount stands.
1. Slowly tip mount until column assembly (A) can be gently
placed on the ground in order to expose the underside of the
base plate (C or D).
2. Install feet (R) on underside of base plate (C or D)
approximately as shown using the provided dimensions.
(See Figure 4)
71/21 1/2 7 1/2 7 1/2 7 1/2
1 1/4
8 1/2
(Bottom view of base plates)
(R) x 12
(R) x 16
(C)
(D)