Instruction Manual PSB-1401
17
Group 10 Installation Procedures
WARNING:Failure to use proper attaching hardware and
installation procedures may result in equip-
ment damage or serious personal injury.
Attach Interface Brackets
1. Identify parts bags B and F.
2. Remove the Nylon spacers from parts bag B.
3. Place the four Nylon spacers over the mounting holes on
your Large Flat Panel display (see Figure 30).
4. Place the interface brackets over the Nylon spacers (see
Figure 30 and Figure 31).
5. Select parts bags F.
CAUTION: Overtightening mounting screws may damage
your Large Flat Panel display.
6. Using the hardware in parts bag F, secure the interface
brackets to your Large Flat Panel display (see Figure 30
and Figure 31). Do not overtighten the mounting screws.
Item Description Qty.
Bracket Left 1
Bracket Right 1
Parts Bag B Nylon Spacer .75” OD x .26” ID x .375” 12
Parts Bag F M5 x 20mm Phillips Head Cap Screw 4
ATTACH MOUNTING
BRACKETS USING
THESE HOLES
Figure 30. Spacer Installation for Group 10
Figure 31. Bracket Attachment for Group 10
