Acoustic Research AW553 Car Speaker User Manual


  Open as PDF
of 4
 
About Variable-Level Audio Outputs:
A variable-level output, such as a headphone jack or certain RCA-type outputs, provides an
audio signal that changes with the volume level set on the audio source. As the volume of the
audio source is adjusted up and down, so is the audio signal strength sent to the transmitter.
This can affect the quality of sound generated by the speaker, and may require an adjustment
of the volume level of the audio source to produce a signal strong enough for the transmitter.
Hint: On most bookshelf-type or compact stereo systems, inserting a headphone plug into
the headphone jack results in automatic cutoff of the regular, or hard-wired speakers.
Hint: Most TVs, regardless of age or price, have variable outputs. If you are unsure which
^Uh^daCEPdSX^^dc_dcbXbgTSaTUTac^cWTCEX]bcadRcX^]\P]dP[B^\TCEbWPeT
^dc_dcbcWPcRP]bfXcRWQTcfTT]ePaXPQ[TP]SgTSFWT]VXeT]PRW^XRTgTSXbP[fPhb
recommended.
Troubleshooting
The following troubleshooting guide takes you through some of the more common problems
associated with the installation and/or operation of a wireless system. If the problem persists,
please call toll-free at 1-800-732-6866 or visit www.acoustic-research.com.
Issue: Cause and solution:
No sound 9^[Yaj^Wjj^[jhWdic_jj[h79fem[hWZWfj[h_i\kbbo_di[hj[Z_djej^[mWbbekjb[jWdZ
j^[fem[hYehZ\hecj^[79WZWfj[h_iÓhcboYedd[Yj[Zjej^[jhWdic_jj[hfem[h
input jack.
9edÓhcj^Wjj^[if[Wa[h_ijkhd[ZedWdZjkd[Zjej^[jhWdic_jj[hÆ
the indicator light on the front of the speaker should be solid blue (not blinking).
?\oekÊh[ki_d]j^[fem[hWZWfj[hi"YedÓhcj^WjXej^\ehj^[if[Wa[hWdZ\ehj^[
transmitter) are fully inserted into their wall outlets and the adapter power cords are
ÓhcboYedd[Yj[Zjej^[fem[h_dfkj`WYaiedj^[jhWdic_jj[hehif[Wa[h$
or
?\oekÊh[ki_d]XWjj[h_[i\ehj^[if[Wa[h"Y^[Yaj^Wjj^[oWh[\h[i^WdZ_di[hj[Zm_j^
correct polarity (+, –).
9^[Yaj^Wjj^[WkZ_eiekhY[Yecfed[djij[h[e"CF)fbWo[h"[jY$_ijkhd[ZedWdZ
transmitting sound as it normally should.
CWa[ikh[j^[lebkc[edoekhWkZ_eiekhY[_ijkhd[Zkf$
9^[Yaj^Wjj^[if[Wa[hlebkc[_ijkhd[Zkf$
?\oekWh[ki_d]WJWf[(Ced_jehekjfkj\hecoekhh[Y[_l[h%WcfWij^[WkZ_e
output, check that you have pressed the Tape Monitor/Tape 2 button on the front of
the receiver. This will turn on the Tape 2 outputs, which may not have been active.
Issue: Cause and solution:
No sound/
distortion/
static
M^[dki_d]XWjj[hofem[h"cWa[ikh[j^[XWjj[h_[iWh[\h[i^WdZh[fbWY[_\
necessary.
9^[Yaj^Wjj^[if[Wa[hÊi_dZ_YWjehb_]^j_iieb_ZXbk[dejXb_da_d]m^[dWdWkZ_e
source is connected to the transmitter
9^Wd][j^[fei_j_ede\j^[Y^Wdd[bi[b[Yjim_jY^'"(eh)jeY^Wd][j^[ef[hWj_d]
frequency. Then press the AutoScan button on the speaker’s back panel to make the
speaker retune.
9^Wd][j^[beYWj_ede\j^[jhWdic_jj[h$FbWY[_jWi^_]^WdZWmWo\heceXijhkYj_edi
as possible. Avoid placing the transmitter directly on top of or behind a TV.
Cel[j^[jhWdic_jj[hWdZif[Wa[hYbei[hje][j^[h$I[dZ_d]j^[i_]dWbj^hek]^
certain materials, such as glass, tile, and metal, can decrease the effective
transmitting distance of the system.
More Helpful Information
About Fixed-Level Audio Outputs
7Ón[Z#b[l[b"ehb_d[#b[l[b"WkZ_eekjfkj_iYedi_Z[h[Z_Z[Wbi_dY[_jfhel_Z[iWdWkZ_ei_]dWb
unchanged by adjustments to the audio source volume control.
Hint: Fixed-level audio outputs from stereo receivers/amps will typically be designated as
Tape (or Record) outputs or DVR/DVD-R audio output connections.
Fixed-level outputs from TVs are usually marked as ‘Constant,’ ‘Fixed,’ or ‘Select.’ If they are not
marked as such, they are probably variable outputs (see “About Variable-Level Audio Outputs” on
j^[d[njfW][$Ekjfkji\hec:L:fbWo[hiWh[WbceijWbmWoiÓn[Z$
Hint: When connecting to the audio outputs of a DVD player, remember that the DVD player
must be showing a TV channel for sound to be produced.
Trademark(s) ® Registered www.acoustic-research.com MADE IN CHINA AWS53 US IB 00
12 Month Limited Warranty
Specifications
Transmitter
 Ecd_#Z_h[Yj_edWb/&&C>pXheWZYWij
 ;\\[Yj_l[jhWdic_jj_d]hWd][0
up to 150 ft. (45m)*
 F^Wi[#beYa[ZbeefY_hYk_jhoFBB
 7kjecWj_Yb[l[bYedjheb7B9
 )i[b[YjWXb[XheWZYWij\h[gk[dY_[i
 Ij[h[eWkZ_e_dfkj
Speaker
 Fki^#Xkjjed"Wkje#beYajkd_d]
 (#mWoWYekij_YZ[i_]d0
2” tweeter, 3.5” woofer
 +MWjjHCI_dj[hdWbWcfb_Ó[h
 Ecd_#Z_h[Yj_edWbiekdZ
 <h[gk[dYoh[ifedi[0*&>p#'+a>p
 B[\j%Cede%H_]^jim_jY^
 Ef[hWj[iki_d]ikffb_[Z79WZWfj[hehi_n,
AA batteries (not included)
*Maximum range; results may vary according to environment.
Audiovox Electronics Corporation (the “Company”) warrants to the original retail purchaser of this product that
should this product or any part thereof, under normal use and conditions, be proven defective in material or
workmanship within 12 months from the date of original purchase, such defect(s) will be repaired or replaced
(at the Company’s option) without charge for parts and repair labor. To obtain repair or replacement within
the terms of this Warranty, the product along with any accessories included in the original packaging is to be
Z[b_l[h[Zm_j^fhee\e\mWhhWdjoYel[hW][[$]$ZWj[ZX_bbe\iWb["if[Y_ÓYWj_ede\Z[\[Yji"jhWdifehjWj_ed
prepaid, to the Company at the address shown below. Do not return this product to the Retailer.
This Warranty is not transferable and does not cover product purchased, serviced or used outside the United
States or Canada. The warranty does not extend to the elimination of externally generated static or noise, to
costs incurred for the installation, removal or reinstallation of the product.
The warranty does not apply to any product or part thereof which, in the opinion of the company, has suffered or
been damaged through alteration, improper installation, mishandling, misuse, neglect, accident or exposure to
moisture. This warranty does not apply to damage caused by an AC adapter not provided with the product, or by
leaving non-rechargeable batteries in the product while plugged into an AC outlet.
THE EXTENT OF THE COMPANY’S LIABILITY UNDER THIS WARRANTY IS LIMITED TO THE REPAIR OR
REPLACEMENT PROVIDED ABOVE AND, IN NO EVENT, SHALL THE COMPANY’S LIABILITY EXCEED THE
PURCHASE PRICE PAID BY PURCHASER FOR THE PRODUCT.
This Warranty is in lieu of all other express warranties or liabilities. ANY IMPLIED WARRANTIES, INCLUDING
ANY IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, SHALL BE
LIMITED TO DURATION OF THIS WARRANTY. ANY ACTION FOR BREACH OF ANY WARRANTY HEREUNDER,
INCLUDING ANY IMPLIED WARRANTY, MUST BE BROUGHT WITHIN A PERIOD OF 24 MONTHS FROM THE DATE
OF ORIGINAL PURCHASE. IN NO CASE SHALL THE COMPANY BE LIABLE FOR ANY CONSEQUENTIAL OR
INCIDENTAL DAMAGES WHATSOEVER. No person or representative is authorized to assume for the Company
any liability other than expressed herein in connection with the sale of this product.
Some states/provinces do not allow limitations on how long an implied warranty lasts or the exclusion or
limitation of incidental or consequential damage so the above limitations or exclusions may not apply to you.
J^_iMWhhWdjo]_l[ioekif[Y_ÓYb[]Wbh_]^jiWdZoekcWoWbie^Wl[ej^[hh_]^jim^_Y^lWho\hecijWj[%fhel_dY[
to state/province.
U.S.A.:Audiovox Electronics Corp., 150 Marcus Blvd., Hauppauge, New York 11788
CANADA: Audiovox Return Center, c/o Genco, 6685 Kennedy Road, Unit #3 Door 16, Mississauga Ontario L5T
3A5
1. Press the Power button on the back of the speaker to
turn it on.
If you’re using the wireless transmitter, the indicator
light on the front of the speaker blinks while the
speaker is tuning to the transmitter. This indicator
light turns solid blue when the speaker is tuned to
the transmitter--you should hear sound coming from
the speaker now.
Note: If the speaker is not tuned or if the
transmitter is not connected properly, the indicator
light will continue blinking. If this occurs, please see
the Troubleshooting section of this manual.
If you’re using a direct connection to your audio source (via audio cable), all you need to do
is start playback on your audio source‚ you should start hearing sound from the speaker.
IMPORTANT: The indicator light on the front of the speaker indicates the status of the
wireless connection only. If you’re not using the transmitter (or if you’re out of range of the
caP]b\XccTaXcfX[[ZTT_Q[X]ZX]Vd]cX[Xc]SbcWTcaP]b\XccTaCWXbXb]^a\P[
2. Adjust the volume on the speaker as desired.
Note: Make sure your audio source is turned up at least to 75% of full volume (but not so
loud that the sound becomes distorted).
3. If you’re using the wireless transmitter, set up the speaker for mono or stereo operation
using the switch on the bottom of the AWS53 speaker.
a) Monaural operation: The monaural mode (mono) is recommended when using a single
AWS53 by itself. For monaural operation, set the L/M/R switch to “M” on each speaker.
b) Stereo operation: You need an additional AWS53 speaker for the stereo option. Set the
L/M/R switch to “L” on the speaker located to the left from the listener, and set the other
speaker to the “R” position.
Notes:
The speaker automatically retunes if it loses the transmitter’s signal. You can also press the
AutoScan button on the back of the speaker to retune the speaker at any time.
The transmitter turns off automatically if there is no audio signal present for a prolonged period.
Interference in the form of static and/or distortion can sometimes be heard. If this occurs,
R^]a\cWTcaP]b\XccTab_TPZTaPSYdbc\T]cbP]SX]SXRPc^ab8UcWT_a^Q[T\_TabXbcbaTUTac^cWT
Troublesho oting section of this manual.
Using the Speaker System
Turning the Speaker Off
1. Press Power button on the back of the speaker to turn the speaker off.
($9edÓhcj^Wjj^[if[Wa[h_ie\\Xol[h_\o_d]j^Wjj^[_dZ_YWjehb_]^jedj^[if[Wa[hÊi\hedj
panel is no longer illuminated.
Adjusting the Speaker
FCC Statement
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant
to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates, uses, and can radiate radio frequency
energy and, if not installed and used in accordance with the instructions, may cause harmful interference
to radio communication. However, there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or television reception, which can be
determined by turning the equipment off and on, the user is encouraged to try to correct the interference
by one or more of the following measures:
 H[eh_[djehh[beYWj[j^[h[Y[_l_d]Wdj[ddW$
 ?dYh[Wi[j^[i[fWhWj_edX[jm[[dj^[[gk_fc[djWdZh[Y[_l[h$
 9edd[Yjj^[[gk_fc[dj_djeWdekjb[jedWY_hYk_jZ_\\[h[dj\hecj^Wjjem^_Y^j^[h[Y[_l[h_i
connected.
 9edikbjj^[Z[Wb[hehWd[nf[h_[dY[ZhWZ_e%JLj[Y^d_Y_Wd\eh^[bf$
<99H[]kbWj_ediijWj[j^WjkdWkj^eh_p[ZY^Wd][iehceZ_ÓYWj_edijej^_i[gk_fc[djcWole_Zj^[ki[hÊi
authority to operate it.
Industry Canada Regulatory Information
This device complies with RSS-210 of the Industry Canada Rules. Operation is subject to the following
two conditions: 1) this device may not cause interference and 2) this device must accept any interference,
including interference that may cause undesired operation of the device.
This class B digital apparatus complies with Canadian ICES-003.
IC Radiation Exposure Statement: This equipment complies with IC radiation exposure limits set forth for an
uncontrolled environment.
 previous