Filter
Top Products
~ SPECIFICATIONS
Notes on the disc magazine
● Be sure to align the edge of the disc to both
grooves of the disc tray when you set the disc.
If a disc is not set properly, it may cause
damage to the unit,
Disc magazine
Disc tray
● Thedisctraymay betakenoff from the magazine
if you pull the tray forcibly. Ifthe tray was taken
off, push it into the magazine while pressing the
part @as illustrated. Be sure that both ends of
the tray are aligned to the grooves of the
magazine correctly.
‘T
Disc
magazine
DISCtray
Compact disc changer
System
Compact disc digital audio
system
Frequency response 5 Hz – 20 kHz
Wow and flutter
Below measurable limit
Signal to noise ratio 91 dB or more
outputs Line output (for changer
connector only)
Operating temperature
-10
“c to 55 “c
Dimensions 225 x63x 175 mm (w/h/d)
(8 7/sx21/2
x 7 in.)
Weight
1,7 kg
(3.74 Ibs.)
Power requirement 12 V DC car bettery
(negative ground)
DIA converter
1 bit DAC, 8 times over
sampling
Sampling rate 44.1 kHz
Disc size 120 mm
Supplied accessories Disc magazine (1)
Mounting kit (1 set)
Connecting cable (5 m)
(16.4 ft.) (1)
Design and specifications are subject to change without
notice.
ENGLISH 10