Filter
Top Products
PRESETTINGSTATIONS
1
2
Press BAND to select a desired band
from among FMI, FM2, FM3 and AM.
Pm3
Press and hold A.ME for more than 1.5
seconds to activate the automatic
praseting function.
The six strongest available stations will be
stored in memory on the preset station
buttons 1 to 6 in order of their signal
strength.
USethis function to automatically preset up to 6
stations each for FM1, FM2, FM3 and AM (up to
a total of 24 stations).
●When auto memory is completed, the station
stored in 1CH is tuned in.
●To stop auto memory, press A.ME again.
Tocheckthe presetstations(presetscan)
● If you wish to check the preset stations, press
A.ME for less than 1.5 seconds. The preset
stations stored in memory will be tuned in for 5
seconds each in order.
●To stop this function, press A.ME again or press
any of the preset station buttons 1 to 6.
1
1
2
3
3
T
Press BAND to select tha band from
among FMI, FM2, FM3 and AM.
Tune in the station that you wish to
praset with TUNE T or TUNE A.
Preae one of the Dreeet station buttons
1 to 6 for approximately 1.5 seconds.
The number of the pressed preset station
button appears next to the frequency
indication.
Preset ‘number
Repeat these procedures topreset upto6 stations
each for FM1, FM2, FM3 and AM.
●You can manuaiiy preset stations that have not
been seiected by auto memory.
● If you try to preset a station on a preset station
button on which another station of the same
band has aiready been preset, the previously
preset station wili be erased.
During presetting of stations, beeps are heard
regardless of the beep on/off setting (page 5).
7 ENGLISH