Filter
Top Products
TAPEPLAYBACK
SOUNDADJUSTMENTS
Auto reverse function
When the end of the tape is reached during
playback or fast tape transport, the direction of
the tape is automatically reversed, and playback
starts again.
Tape transport side indications
The following indications are displayed to show
the currently playing side.
Upper side
Lower side
)z~_)Zp
e=’-i!=’
Before turning the ignition off
Be sure to eject any cassette from the unit before
turning the ignition off.
Switching modes
When the unit is in Radio mode, inserting a
cassette switches the unit to Tape Play mode
automatically.
To prevent tape problems
Before inserting a cassette into the unit, make
sure that there is noslack in thetape. if necessary,
take uptheslack by insertinga pencil into the
spindle hole and winding.
90-minute or longer tapes are extremely thin and
easily deformed or damaged. They are not
recommended.
21
MUTE
1
2
Press SEL to select the mode that you
wish to adjust from: VOL (volume),
BASS (bass), TRE (treble), BAL
(balance) and FAD (fader).
The following indicators appear incyclic order.
If you do not proceed with step 2 within 5
seconds, the selected mode is canceled, and
the indication returns to the current source
mode.
Press +/- to adiust the level.
Press and hold eith;r button to change the
level rapidly.
+
m
Decreases the
Increases the
volume level
volume level
-
Decreases the Increases the
bass level
bass level
m
Decreases the
Increases the
treble level
treble level
Decreases the
Decreases the
m level of the right
level of the left
speaker(s)
speaker(s)
Decreases the
Decreases the
m level of the front
level of the rear
speakers speakers
Without selecting any mode with SEL, only
the volume level can be adjusted by pressing
+1-.
MUTEbutton
Press this button to temporarily Iowerthevolume.
Press it again to restore the previous volume.
9 ENGLISH