MAINTENANCE
SPECIFICATIONS
Cleaningthefrontpanel
When the front panel is soiled, wipe the surface
of the panel with a dry and soft cloth.
Cleaningthe connector
The connectoron
the reverseside of the front
panel needs to be cleaned occasionally. Wipe
the surface of the connector with a cotton swab
slightly moistened with alcohol.
RADIOSECTION
(FM)
Frequency Range:
87.5 MHz–108 MHz
(100-kHzsteps)
87.5 MHz–108 MHz
$50;k~t-fetepe)
Useble Sensitivity:
50 dB Quieting Sensitivity
17.2dBf
IF Rejec$on:
80 dB
Frequency Reeponse:30 Hz–15,000 Hz
S/N Ratio:
63 dB
Stereo Separation:
35 dB at 1 kHz
Alternate Channel Selectivity
70 dB
Capture Ratio
3 dB
(AM)
Frequency Range: 530 kHz-1 ,710 kHz
(10-kHzsteps)
522 kHz-1,620 kHz
(9-kHz steps)
Usable Sensitivity
30@/ (30 dB)
CDSECTION
Frequency Responee: 17 Hz-20 kHz +0/-3 dB
Dynamic Range:
Morethan 80 dB
Channel Separation: Morethan 65 dB
S/N Ratio:
Morethan 65 dB
Wow/Fluttec Unmeasurable
AUDIOSECTION
Max. Power Output 40 W x 4 channels
TAPE/MDIN input
Input eeneitivity(load impedance)
TAPE/MD IN: 500 mV (10 I@
GENERAL
Power-SupplyVoltage
14.4 V(11 to 16V allowable),
DC, negative ground
Load Impedance
4 Q
Tone Control:
Bass* 10dBat IOOHZ
Treble * 10 dB at 10 kHz
PreampOutput Voltage (load impedance):
2.2
v (lo I@)
Installation size:
182 (W)x 53 (H) x 155 (D) mm
(7’/4 (W)
X 21/6(H) X
61/s(D) inches)
Accessory supplied: Carrying case (1)
● Specifications and external appearance are
subject to change without notice due to product
improvement.
13 ENGLISH