Filter
Top Products
SETTING THE CLOCK
RADIO OPERATION
1
2,4 3
1 Press PWR to turn the unit on.
2 Press and hold DISP for more than 2
seconds.
5 Press Atoset thehour.
Press V to set the minutes.
4 Presa DISP.
The clock starts working from Osecond.
Havingthe clockdisplayedwhile the unit is
turnedon
Pre$s DISP. The clock display appears for a few
minutes, then the unit rsturnsto itsformer cfkplay.
1
2
3
4
2
Press PWR to turn the unit on.
Press BAND to sefect the band from
among FM1, FM2, FM3, AMI, and AM2.
The band indication appears cyclically in
ordsr.
FM1, FM2and FM3sharethesamefrequency
range.
AM1 and AM2 share the same frequsncy
range.
Bandin&ation Frequencyindication
Press (more than 0.5 second) either
TUNE A or TUNE V to tune in the
desired station.
Press A to increase and V to decrease
the frequency.
The unit starts scanning andtunes in astation
automatically (Seek tuning).
Press the button again to deactivate the
function. Repeat the procedure until the
desired station is tuned in.
Note
If you press (less than 0.5 second at a time)
either TUNE A orTUNE V, the frequency
decreases or increases step by step.
Press VOL to project out the control
and turn it to + or - to adjust the
volume,
5 ENGLISH