Filter
Top Products
7
ENGLISH
CD CHANGER
OPERATION
Playing a CD
You can play CDs from a connected AIWA CD Changer.
For detailed information on installing a CD Changer,
refer to the Installation and Connection manual supplied
with the CD Changer.
SRC
DISCN/DISCM
r
/
t
INT REPRNDM
REP 1
CD number Track number
CD Changer indicator
1 Press SRC repeatedly to display “CD-CH.”
The CD Changer play starts.
Intro Play
You can locate a desired track by monitoring the first 10
seconds of all the tracks on the CDs in the disc magazine.
1 Press INT during CD Changer play.
“SCAN” appears on the display.
2 Press INT again when the desired track is played.
The unit returns to normal CD play.
One track Repeat Play
You can play a track repeatedly.
1 Press REP1 during CD Changer play.
“REPEAT1” appears on the display.
To cancel Repeat Play, press REP1 again.
One disc Repeat Play
You can play all tracks on a disc repeatedly.
1 Press REP during CD Changer play.
“REPEAT” appears on the display.
To cancel Repeat Play, press REP again.
One disc Random Play
You can play all the tracks on a disc in random order.
1 Press RNDM during CD Changer play.
“RANDOM” appears on the display.
To cancel Random Play, press RNDM again.
Note
Pressing r during Random Play locates the beginning
of the current track. The unit does not retrieve previous
tracks during Random Play.
TROUBLESHOOTING
Error code (when using the optional AIWA CD
Changer)
In the following cases the corresponding error code
indication appears. Follow the suggestions below to
solve such problems. If the error code indication does
not disappear, consult an AIWA service center.
E01 The disc magazine is not properly inserted in the
CD Changer. Reinsert the magazine. Refer to
the instruction manual for the CD Changer.
E02 No CDs are loaded in the disc magazine. Insert
CDs properly. Refer to the instruction manual for
the CD Changer.
E03 Focus error. Check that the discs are loaded
properly in the disc magazine (right side up,
etc.).
E04 Problem with the CD Changer. Reset the unit by
pressing the reset button. If this does not solve
the problem, consult an AIWA service center.
Reset button
If a CD does not operate properly, press the reset button
with a pointed object such as a pencil, etc. Note that all
your settings will be erased if this button is pressed.
Reset button
Press
t
r
and hold t, then
release it at the
desired point
and hold r, then
release it at the
desired point
DISCN
DISCM
To
Skip to the next track
Skip back to the beginning of
the current track or to the
previous track
Advance rapidly to locate a
desired point
Reverse rapidly to locate a
desired point
Start CD Changer play from
the first track on the next disc
Start CD Changer play from
the first track on the previous
disc