Aiwa XP-Z3C Car Stereo System User Manual


 
26
ENGLISH
3 Press i/k (for album selection) and
r /t (for track selection)
repeatedly to select a track to be
added to the program.
a Selected album number (flashing)
b Selected track number (flashing)
c Program order
4 Press P-MODE/ENT.
The selected track is stored in the
program.
Repeat steps 3 and 4 to program more
tracks.
5 Press e on the unit or c/a on
the remote control to start program
play.
To check the programmed tracks
Press P-MODE/ENT repeatedly before you
proceed to step 5. The number of each
programmed track appears in order of
playback.
To add tracks to the program
Repeat steps 1 to 4 when the PRGM is
appeared while the unit is stopped. Tracks
can be added to the end of the program.
PLAYBACK OF MP3 DISCS
When the 24 tracks are programmed
“P-FULL” appears, and no more tracks can
be added.
To cancel the program play
Press s during programming or while the
program play is stopped.
Note
Program play is also canceled when the
disc compartment is opened or the auto
power off function turns off the power.
You cannot go back to a previous track by
holding r pressed during playback.
Repeat play can be performed during
program play.