Filter
Top Products
34
English
CD Operation
4.^
4
Titling Disc (Continued)
Press the TITLE button to store the first
character. The first character will stop blinking
and the display will automatically advance to
the next character. When that character begins
to blink, you may choose the next letter or
symbol of your title.
Repeat the steps and above to complete
the titling. Pressing the TITLE button after
entering the eighth character, automatically
stores the title into memory.
In case of storing a title of less than 8 charac-
ters:
For example, after 3rd digit character is
completed, 4th digit character is blinking. Then,
go to step .
Press and hold the TITLE button for at least 3
seconds to record the title.
Notes:
• When the display shows "FULL DATA", the
memory is full and no input is accepted. In
order to input new titles, old titles must be
deleted first. Refer to the section "Erasing
Disc Title" on page 35 to delete titles.
• The 3D Shuttle can memorize up to 30 CD
titles maximum.
• The CD Shuttle memory capacity depends
upon the model being used.
• In the case of the 3D Shuttle, the memorized
titles will be erased if the battery power lead
is disconnected, keep this in mind when
touching power cables.
AL
CLK TITLE
5
CLK TITLE
6