Alpine CDA-7864 Car Stereo System User Manual


 
16-EN
CD Player Operation
SOURCE BAND
Disc Select buttons
(1 through 6)
f UP
DN g M.I.X.
F
RPT SCAN
Fast Forward and Backward
1 Press and hold the DN g or f UP button to
quickly move backward or forward until you
reach the desired section of the track.
Repeat Play
1 Press the RPT(Repeat) button to play back
repeatedly the track being played.
The RPT indicator appears and the track will be
played repeatedly.
Press the RPT button again and select OFF to
deactivate the repeat play.
NOTES
If a CD Changer is connected and the REPEAT ALL
mode is selected, the unit repeatedly plays back all
tracks on the disc selected.
In case a 6-disc CD changer is connected:
In CD changer mode, press the "F" button to illuminate
the FUNC indicator and go to step 1 within 5 seconds.
In case a 12-disc CD changer is connected:
In CD changer mode, press the "F" button twice to
illuminate the FUNC indicator and go to step 1 within
5 seconds.
M.I.X. (Random Play)
1 Press the M.I.X. button in the play or pause mode.
The M.I.X. indicator will illuminate and the tracks
on the disc will be played back in a random
sequence. After all the tracks on the disc have
been played back once, the player will begin a
new random sequence play until the M.I.X. mode
is cancelled.
To cancel M.I.X. play, press the M.I.X. button
again to turn off the M.I.X.
NOTES
If a CD Changer equipped with the ALL M.I.X. function
is connected, ALL M.I.X. will also be selectable.
In this mode, the tracks on all the CDs in the current
magazine will be included in the random playback
sequence.
In case a 6-disc CD changer is connected:
In CD changer mode, press the "F" button to illuminate
the FUNC indicator and go to step 1 within 5 seconds.
In case a 12-disc CD changer is connected:
In CD changer mode, press the "F" button twice to
illuminate the FUNC indicator and go to step 1 within
5 seconds.
Scanning Programs
1 Press the SCAN button to activate the Scan
mode.
The first 10 seconds of each track will be played
back in succession.
To stop scanning, press the SCAN button and
deactivate the Scan mode.
NOTES
In case a 6-disc CD changer is connected:
In CD changer mode, press the "F" button to illuminate
the FUNC indicator and go to step 1 within 5 seconds.
In case a 12-disc CD changer is connected:
In CD changer mode, press the "F" button twice to
illuminate the FUNC indicator and go to step 1 within
5 seconds.
M.I.X. ALL M.I.X. (off)
→→
REPEAT REPEAT ALL (OFF)