Alpine CDA-7969R Car Stereo System User Manual


 
16-EN
Receiving Traffic Information While
Playing CD or Radio
1 Press the F button. The FUNC indicator will
illuminator.
2 Press the F2 (T.INF) button repeatedly until the
T.INFO indicator appears in the display.
3 Press the DN g and f UP buttons to
select a traffic information station if necessary.
When a traffic information broadcast starts, the
unit automatically mutes the CD player or the
regular FM broadcast.
When the traffic information broadcast finishes,
the unit automatically returns to the original
source play before the traffic information
broadcast began.
When traffic information stations cannot be
received:
In the tuner mode:
When the TP signal can no longer be
received for over 1 minute, the "T.INFO"
indicator blinks.
In the CD mode:
When the TP signal can no longer be
received, the traffic information station of
another frequency will be selected
automatically.
NOTE
The receiver is equipped with the EON (Enhanced Other
Networks) function in order to keep track of additional
alternative frequencies to the AF list. The EON indicator
appears while an RDS EON station is being received. If
the station being received does not broadcast the traffic
information, the receiver automatically tunes in the
related station that broadcasts the traffic information
when it occurs.
RDS Operation
TUNE
4 Press the F2 button to deactivate the Traffic
Information mode. The T.INFO indicator
disappears.
5 Press the F button to activate the normal mode.
The FUNC indicator will turn off.
Priority PTY (Programme Type)
This function allows presetting of a programme
type such as music category, news, etc. You can
listen to a programme in the preset programme
type as the unit automatically gives priority to the
preset programme type when it begins
broadcasting, and interrupts the programme you
are currently listening. This feature is functional
when your unit is set to a mode other than the LW
and MW.
1 Press the F button. The FUNC indicator will
illuminate.
2 Press the F4 (P.PTY) button to activate the
PRIORITY PTY mode.
"PRIO-PTY" is displayed for 2 seconds and then
the programme type for 3 seconds. The initial
setting is "NEWS."
NOTE
If no button is pressed within 5 seconds after pressing the
F4 (P.PTY) button, the PRIORITY PTY mode is
automatically cancelled.
3 Press the DN g or f UP button within 5
seconds while "NEWS" is being displayed to
choose a desired programme type. Then press
F4 button. The PRIORITY PTY function will
activate.
INTLZ
DN g f UP F F2 F4 F6