Alpine cda-7873 Car Satellite Radio System User Manual


 
17-EN
Music Sensor (Skip)
1 Momentarily press the g DN button once
during CD play to return to the beginning of the
current track. If you wish to access the beginning
of a track further back, repeatedly press until
you reach the desired track.
Press the f UP button once to advance to
the beginning of the next track. If you wish to
access the beginning of a track further ahead,
press repeatedly until the desired track is
reached.
NOTE
The music sensor feature is functional in the play or
pause mode.
Fast Forward and Backward
1 Press and hold the g DN or f UP button
to quickly move backward or forward until you
reach the desired section of the track.
Repeat Play
1 Press the REPEAT button to play back
repeatedly the track being played.
The track will be played repeatedly.
Press the REPEAT button again and select OFF
to deactivate the repeat play.
NOTES
If a CD Changer is connected and the RPT ALL mode
is selected, the unit repeatedly plays back all tracks on
the disc selected.
In case a 6-disc CD changer is connected:
In CD changer mode, press the “F” button to illuminate
the
indicator and go to step 1 within 5 seconds.
In case a 12-disc CD changer is connected:
In changer mode, press the “F” button twice to
illuminate the
indicator and go to step 1 within
5 seconds.
RPT RPT ALL (off)
M.I.X. (Random Play)
1 Press the M.I.X. button in the play or pause mode.
The tracks on the disc will be played back in a
random sequence. After all the tracks on the disc
have been played back once, the player will
begin a new random sequence play until the
M.I.X. mode is cancelled.
To cancel M.I.X. play, press the M.I.X. button
again to turn off the M.I.X.
NOTES
If a CD Changer equipped with the ALL M.I.X. function
is connected, ALL M.I.X. will also be selectable.
In this mode, the tracks on all the CDs in the current
magazine will be included in the random playback
sequence.
In case a 6-disc CD changer is connected:
In CD changer mode, press the “F” button to illuminate
the
indicator and go to step 1 within 5 seconds.
In case a 12-disc CD changer is connected:
In CD changer mode, press the “F” button twice to
illuminate the
indicator and go to step 1 within
5 seconds.
Scanning Programs
1 Press the SCAN button to activate the Scan
mode.
The first 10 seconds of each track will be played
back in succession.
To stop scanning, press the SCAN button and
deactivate the Scan mode.
NOTES
In case a 6-disc CD changer is connected:
In CD changer mode, press the “F” button to illuminate
the
indicator and go to step 1 within 5 seconds.
In case a 12-disc CD changer is connected:
In CD changer mode, press the “F” button twice to
illuminate the
indicator and go to step 1 within
5 seconds.
M.I.X. ALL M.I.X. (off)