Filter
Top Products
17-EN
Controlling CD Changer (Optional)
An optional 6-disc or 12-disc CD Changer may be
connected to the CDA-7965/CDA-7864/
CDA-7863/CDA-7862 if it is Ai-NET compatible.
With a CD Changer connected to the Ai-NET
input of the CDA-7965/CDA-7864/CDA-7863/
CDA-7862, the CD Changer will be controllable
from the CDA-7965/CDA-7864/CDA-7863/
CDA-7862.
Using the KCA-400C (the Multi-Changer Switching
device) multiple changers can be controlled by the
CDA-7965/CDA-7864/CDA-7863/CDA-7862.
See the Multi-Changer Selection section on page
17 for selecting the CD Changers.
NOTES
• The controls on the CDA-7965/CDA-7864/CDA-7863/
CDA-7862 for CD Changer operation are operative only
when a CD Changer is connected.
• The "Changer" indicator illuminates in the CD Changer
mode.
1 Press the SOURCE button to activate the
CHANGER mode. The display shows the
"Changer", disc number and track number.
NOTE
The source indicator varies depending on the connected
source.
2 Press the Disc Select buttons (1 through 6)
corresponding to one of the discs loaded in the
CD Changer. The selected disc number appears
in the display and CD playback starts.
NOTES
• After selecting the desired disc, you can operate in the
same way as for the CDA-7965/CDA-7864/CDA-7863/
CDA-7862 CD player.
For details, please see the CD Operation section.
• If the FUNC indicator is illuminated the Disc Select
buttons become nonfunctional.
When a 12-disc CD Changer is connected:
To select discs numbered from 1 to 6, the
procedure is the same as for the 6-disc CD
Changer. To select discs numbered from 7 to 12,
first press the "F" button. This changes the "D"
indicator to "d". Then press the desired Preset
button. With the "F" button activated, the Preset
buttons 1 to 6 will represent discs 7 to 12
respectively.
Multi-Changer Selection
Alpine's Ai-NET system will support up to 6 CD
Changers. When operating two or more changers,
the KCA-400C (Multi-Changer Switching device)
must be used. If you use 1 Switching device, you
can connect up to 4 CD Changers. If you use 2
Switching devices, you can connect up to 6 CD
Changers.
1 Press the SOURCE button on the CDA-7965/
CDA-7864/CDA-7863/CDA-7862 to activate the
CD Changer mode.
Alternatively, press the SOURCE button on the
Remote Control (RUE-4185) to activate the CD
Changer mode. Proceed to Step 3 below to
select the desired CD Changer.
2 Press the BAND button on the CDA-7965/CDA-
7864/CDA-7863/CDA-7862 or the RUE-4185 to
activate the CD Changer Selection mode.
3 The CD Changer Selection mode remains active
for 3 seconds after Step 2 is performed. Press
the BAND button until the desired CD Changer
indicator appears on the display.
NOTE
If the selected CD Changer is not connected, the display
will show "NO CHGRX".
Alternatively press the BAND button on the
Remote Control until the desired changer
indicator appears on the display.
4 To operate the selected changer, see "CD
Operation" section.
REMOTE CONTROL UNIT
RUE
-
4185