Filter
Top Products
17-EN
01GB04CDE101E.fm
ALPINE CDE-101E 68-09359Z76-B (EN)
Connecting to an External Amplifier (POWER IC)
When an external amplifier is connected, sound quality can be improved
by stopping the power supply of the built-in amplifier.
CDE-103EBT/CDE-102E:
• No sound is produced by the system when the power output is set to
OFF.
Setting the AUX+ SETUP Mode
An external device (such as a portable music player) can be connected
to the Full Speed connector of this unit. A conversion cable
(KCE-237B) for building up the AUX IN (optional) is required.
A portable music device and an iPhone/iPod cannot be connected to the
Full Speed connector at the same time.
You can change the AUX+ name display when AUX+ SETUP is set to
ON. Press //ENT when AUX+ SETUP is set to ON, and select
AUX+ NAME by turning the Rotary encoder, then press //ENT.
After that, turn the Rotary encoder to select the desired AUX+ name.
Setting the AUX NAME mode (CDE-103EBT/CDE-102E
only)
You can change the AUX NAME display in the SETUP mode.
*
1
After the setting is completed, AUX is displayed on the unit.
*
2
After the setting is completed, PMD is displayed on the unit.
POW ON (Initial setting) / POW OFF
POW OFF: Use this mode when the line output of this unit
is used to drive an external amplifier. In this
setting, the head unit’s internal amplifier is
turned OFF and cannot drive speakers.
CDE-101E/CDE-101EM:
POW ON : The speakers are driven by the built-in
amplifier.
Amplifier
Front
left
Front
right
Amplifier
Rear
left
Rear
right
Amplifier
Front
left
Front
right
Speakers
SPEAKER
RIGHT FRONT
Front
right
SPEAKER
RIGHT REAR
Rear
right
SPEAKER
LEFT REAR
Rear
left
SPEAKER
LEFT FRONT
Front
left
AUX+ ON / AUX+ OFF (Initial setting)
AUX+ ON: Set to ON when a portable device is connected. If
SOURCE/ is pressed and AUX+ is selected, the
sound of the portable device is input to the unit.
AUX+ OFF: Set to OFF when an iPhone/iPod is connected.
AUXILIARY*
1
(Initial setting) / TV / DVD / PORTABLE*
2
/ GAME
01GB00CDE101E.book Page 17 Monday, November 3, 2008 10:12 AM