Alpine CDE-104BTI Car Stereo System User Manual


 
12-EN
1
Insert a disc with the label side facing up.
The disc will be pulled into the unit automatically, and the
” indicator lights up.
When a disc is already inserted, press SOURCE/ to
switch to the DISC mode.
The mode will change every time the button is pressed.
TUNER DISC USB AUDIO iPod*
1
/AUX+*
2
BT AUDIO*
3
AUX*
4
TUNER
*
1
Only when the iPhone/iPod is connected and AUX+ SETUP is set to
OFF, refer to
“Setting the AUX+ SETUP Mode” (page 20).
*
2
Displayed only when AUX+ SETUP is set to ON, refer to “Setting the
AUX+ SETUP Mode” (page 20).
*
3
Only for CDE-101R/CDE-101RM/CDE-102Ri and BT IN is set to BT
ADAPTER. Refer to
“Bluetooth Setting” (page 19).
*
4
Refer to “Using the Front AUX Input Terminal (CDE-102Ri/CDE-
103BT/CDE-104BTi only)” (page 18).
2
While playing back MP3/WMA/AAC, press 1 /AF or
2 to select the desired folder.
Pressing and holding 1 /AF or 2 will change folders
continuously.
3
Press or to select the desired track (file).
Returning to the beginning of the current track (file):
Press .
Fast backward:
Press and hold .
Advancing to the beginning of the next track (file):
Press .
Fast forward:
Press and hold .
4
To pause playback, press / /ENT.
Pressing / /ENT again will resume playback.
5
To eject the disc, press .
Do not remove a CD during its eject cycle. Do not load more than
one disc at a time. A malfunction may result from doing either.
If the CD does not eject, press and hold for at least 2 seconds.
The “ ” indicator lights up when a disc is inserted.
Three-inch (8cm) CDs can not be used.
CDE-101R/CDE-101RM (compatible with MP3)/
CDE-102Ri/CDE-103BT/CDE-104BTi (compatible with MP3/WMA/
AAC):
The CD-player can play discs containing audio data, MP3 data,
WMA data and AAC data.
WMA format files that are protected by DRM (Digital Rights
Management), AAC format files that have been purchased from the
iTunes Store and files that are copy-protected (copyright protection)
cannot be played back on this unit.
The track display for MP3/WMA/AAC data playback is the file
numbers recorded on the disc.
The playback time may not be correctly displayed when a VBR
(Variable Bit Rate) recorded file is played back.
MP3/WMA/AAC Play Display
The folder number and file number will be displayed as
described below.
Press VIEW to switch the display. See “Displaying the Text”
(page 17) for information about display switching.
Repeat Play
Press 4 to play back repeatedly the track being
played.
The track (file) will be played repeatedly.
Press 4 again and select off to deactivate repeat play.
CD mode :
MP3/WMA/AAC mode :
M.I.X. (Random Play)
Press 5 in the play or pause mode.
The tracks (files) on the disc will be played back in random
sequence.
To cancel M.I.X. play, press 5 again.
CD mode :
F101 T103
Folder number
display
File number
display
: Only a track is repeatedly played back.
: Only a file is repeatedly played back.
: Only files in a folder are repeatedly played back.
: The tracks are played back in random sequence.