Alpine CDE-130RM Car Stereo System User Manual


 
16-EN
Specifications
FM TUNER SECTION
MW TUNER SECTION
LW TUNER SECTION
CD PLAYER SECTION
USB SECTION
Front AUX input
GENERAL
Due to continuous product improvement, specifications and design
are subject to change without notice.
Tuning Range 87.5-108.0 MHz
Mono Usable Sensitivity 0.7 µV
Alternate Channel Selectivity 80 dB
Signal-to-Noise Ratio 65 dB
Stereo Separation 35 dB
Capture Ratio 2.0 dB
Tuning Range 531-1,602 kHz
Sensitivity (IEC Standard) 25.1 µV/28 dB
Tuning Range 153-281 kHz
Sensitivity (IEC Standard) 31.6 µV/30 dB
Sampling Range 8 times oversampling
DA Converter 1 bit DAC System
Pick-up Type 3-beam Photo Detector Pick
Up
Light Source Semiconductor laser
Wave length 790 nm
Laser Power CLASS I
Frequency Response 20-20,000 Hz (±1 dB)
Signal-to-Noise Ratio 96 dB
Total Harmonic Distortion 0.01% (at 1 kHz)
Wow & Flutter Below measurable limits
Channel Separation 85 dB
USB requirements 1.1/2.0 Full Speed
Maximum Supply Compatibility 500 mA
Input Impedance 10 kohms
Allowable external input 2.0 V
Connector 3.5 mm ϕ Stereo mini-pin
Power Requirement 12 V DC (11-16 V allowable),
Test voltage 14.4 V, Negative
ground
Current Consumption Less than 2.1 A (CD mode;
0.5 W × 4)
Maximum Power Output 50 W × 4 (at 1 kHz)
volume control maximum
Power Output 18 W × 4
(1 kHz, 1 %, 4 ohms)
Speaker Impedance 4-8 ohms
Pre-Output Voltage 2 V (CD mode, 1 kHz, 0dB)
Pre-Output Impedance 200 ohms
Dimensions (W × H × D) 178 × 50 × 160 mm
Weight 1.2 kg