Filter
Top Products
7-EN
Automatic Memory of Station Presets
1
Press BAND repeatedly until the desired radio
band is displayed.
2
Press and hold TUNE/A.ME for at least 2 seconds.
The frequency on the display continues to change while
the automatic memory is in progress. The tuner will
automatically seek and store 6 strong stations in the
selected band. They will be stored into buttons 1 to 6 in
order of signal strength.
When the automatic memory has been completed, the
tuner goes to the station stored in preset location no. 1.
• If no stations are stored, the tuner will return to the original station
you were listening to before the auto memory procedure began.
Tuning to Preset Stations
1
Press BAND repeatedly until the desired band is
displayed.
2
Press any one of the station preset buttons (1
through 6) that has your desired radio station in
memory.
The display shows the band, preset number and
frequency of the station selected.
Station Title Search Function (CDE-9845 only)
If the title of a radio station is entered, you can search for that radio
station by its title while listening to the currently received radio
station.
1
Press in Radio mode to switch to Title Search
mode.
The first title input blinks in the display.
2
Select the desired title by turning the Rotary
encoder within 10 seconds.
3
Press the Rotary encoder to receive the
frequency of the selected title.
• Title Search mode is canceled by pressing and holding for at
least 2 seconds.
• If a station has no title, “NO TITLE” is displayed for 2 seconds.
Frequency Search Function (CDE-9845 only)
You can search for a radio station by its frequency.
1
Press and hold for at least 2 seconds in Radio
mode to activate Frequency Search mode.
2
Turn the Rotary encoder within 10 seconds to
select the desired frequency.
3
Press the Rotary encoder to receive the selected
frequency.
• Frequency Search mode is canceled by pressing and holding for
at least 2 seconds.