Filter
Top Products
18-EN
01GB05CDA-9854R.fm
ALPINE CDE-9850Ri 68-04123Z56-A (EN)
You can flexibly customize the unit to suit your own preferences and
usage. Choose the SETUP menu from Sound Customizing, Visual
Customizing, etc., to select your desired setting.
1
Press MENU to select the SETUP mode, then press
MODE.
BASS ENGINE SETUP RETURN (OFF) BASS ENGINE
2
Press or to select the desired SETUP
menu, then press MODE.
(e.g. Select SUBWOOFER)
FM LEVEL RDS REGIONAL*
1
PI SEEK*
2
ALERT PTY31*
3
ILLUMINATION DIMMER
SUBWOOFER (SUBW SYSTEM)*
4
PLAY MODE
SCROLL TYPE TEXT SCROLL POWER IC DEMO
FM LEVEL
*
1
Refer to “Receiving RDS Regional (Local) Stations” (page 9)
*
2
Refer to “PI SEEK Setting” (page 9)
*
3
Refer to “Setting PTY31 (Emergency Broadcast) reception” (page 9)
*
4
Displayed only when SUBW is ON.
3
Turn the Rotary encoder to change the setting.
(e.g. Select SUBW ON or SUBW OFF.)
4
Press MENU to select RETURN.
After 2 seconds, the unit returns to normal mode.
Pressing and holding MENU for at least 2 seconds will
return to normal mode.
Adjusting Source Signal Levels
If the difference in volume level between the CD player and FM radio is
too great, adjust the FM signal level.
Subwoofer On and Off
When the subwoofer is on, perform the steps below to adjust the
subwoofer output level.
1 In the normal mode, press MODE repeatedly to select the
SUBW mode.
2 Adjust the level by turning the Rotary encoder.
Setting the Subwoofer System
Select either SYS1 or SYS2 for the desired subwoofer effect.
Changing Lighting Colour
You can change the lighting colour of the buttons.
BLUE RED
Dimmer Control
Set the DIMMER control to AUTO to decrease the illumination
brightness of the unit with the head lights of the vehicle ON. This mode
is useful if you feel the unit's backlighting is too bright at night.
• If your vehicle should have a dimmer control for the dashboardlights,
never connect the DIMMER cable (orange) of the radio to this
dimmer control.
Scroll Type Setting
Choose from two scrolling methods.
Select the type you prefer.
Scroll Setting (TEXT SCROLL)
This CD player can scroll the disc and track names recorded on CD-
TEXT discs, as well as the text information of MP3/WMA files, folder
names, and tags.
SETUP
A typical SETUP procedure is shown in steps 1 to 4 as
follows. See below for further information about each
SETUP menu.
Sound Customizing
FM-LEVEL HI (Initial setting) / FM-LEVEL LOW
MENURotary encoder
MODE
SUBW ON (Initial setting) / SUBW OFF
BASS TREBLE SUBW BALANCE FADER
DEFEAT VOLUME BASS
SUBW SYS1 (Initial setting) / SUBW SYS2
SUBW SYS1: Subwoofer level changes according to the main
volume setting.
SUBW SYS2: Subwoofer level change is different from the main
volume setting. For example, even at low volume
settings, the subwoofer is still audible.
Visual Customizing
ILLUMI BLUE (Initial setting) / RED
DIMMER AUTO (Initial setting) / DIMMER MANU
SCROLL TYPE1 / SCROLL TYPE2 (Initial setting)
SCROLL AUTO / SCROLL MANU (Initial setting)
SCROLL AUTO: The CD text information, the text information of
folder and file names, and the tags are
scrolled automatically. Also, tag information is
automatically scrolled without pressing TITLE
in the tag information display mode.
SCROLL MANU: The display is scrolled when a disc is loaded
or when a track is changed, etc.
01GB00CDA-9854R.book Page 18 Wednesday, October 19, 2005 8:21 AM