Alpine KCA-420i Car Stereo System User Manual


 
10-EN
Controling from the IVA-D901 model
1
Press 7 (Page 1/3) twice.
The Function Guide display changes.
2
Press 3 (DISC3).
The album search mode is selected.
3
Press LIST/INPUT.
The song list screen is displayed.
4
Press 6 (NEXT -).
The album name is displayed.
5
Turn the Rotary encoder to select desired
album, then press the Rotary encoder.
All songs of the selected album will be played back
repeatedly.
Controling from the IVA-D300 model
1
Touch [P1/3] on the function guide to change
to [P3/3].
The disc number is displayed.
2
Touch [DISC 3].
The album search mode is selected.
3
Touch [P3/3] to change [P1/3].
The function guide changes.
4
Touch [ ] on the function guide.
The list screen of the song is displayed.
5
Touch [ ] of any song.
The album search mode is entered, then the album
list screen is displayed.
-
6
Touch [-] of the desired album name.
All songs of the selected album will be played back
repeatedly.
Searching by song name
If a song is selected using the playlist/artist/album search
mode, new song searches will only display songs from the
current playlist/artist/album. To search all songs in the iPod,
select the “iPod name” in the playlist search mode, and then
perform the search.
•When the IVA-D901/IVA-D300 models are connected, a
search cannot be performed by the song name.
If the “iPod’s name” contains characters not supported by
the head unit’s display, “NO SUPPORT” or “NO SUPRT”
may be displayed for the “iPod’s name.”
Controling from the CDA-9835/CDA-9833/
CDA-9831/CDA-9830/CDA-9827/CDA-9826/CDA-
9825/CDA-9820XM models
1
Enter the folder search mode by pressing
(SEARCH).
The song name is displayed.
File search mode Folder search mode
2
Within 10 seconds, select the song name by
turning the Rotary encoder, then press the
Rotary encoder.
The selected song will be played back.
Controling from the CVA-1004 model
1
When the monitor is open, press and hold the
Rotary encoder for at least 2 seconds
during playback.
The unit switches to file/folder search mode.
2
Press and hold -/J for at least 2 seconds to
select folder search.
The song name is displayed.
3
Press g or f to select the desired song
name.
4
Press the Rotary encoder.
The selected song will be played back.
Quick Search
You can search for songs.
If there are more than 255 songs, they can be played back,
but cannot be correctly displayed.
•When the IVA-D300/IVA-D901/CVA-1004 models are
connected, the quick search function cannot be used.
The Quick search in the iPod mode takes more time than
the normal Quick search.
Controling from the CDA-9835/CDA-9833/
CDA-9831/CDA-9830/CDA-9827/CDA-9826/CDA-
9825/CDA-9820XM models
1
Press and hold SEARCH (SEARCH/QS)
for at least 2 seconds to activate Quick
Search mode.
2
Turn the Rotary encoder within 10 seconds
to select a desired song.
The selected song is played back immediately.